162.5.1 Error Messages


F01:	STNO <xxxxxx> IS NOT A STATION NUMBER
F03:	STNO <xxxxxx> IS NOT A <dev> COMBINATION CODE
F04:	STNO <xxxxxx> DOES NOT EXIST
F05:	STNO <xxxxxx> IS AN INTERNAL STATION NUMBER
F08:	<dev><i> NOT SPECIFIED
F09:	NO PARAMETERS SPECIFIED IN THE COMMAND
F10:	<dev>2 HAS NOT BEEN ALLOCATED A <dev> DEVICE
F12:	CONVERSION CANNOT BE WRITTEN IN RUFUM TABLE BECAUSE OF MEMORY OVERFLOW. REQUEST MORE MEMORY WITH AMO DIMSU (TYPE=CC, BLK100=xxx)
F13:	RANGE LIMIT VALUES FOR PARAMETER <stno>1 HAVE DIFFERENT LENGTHS
F14:	STNO <xxxxxx> IS AN EXTERNAL STATION
F15:	STNO1 <xxxxxx>: CONVERSION TO THE SAME STATION NUMBER NOT PERMISSIBLE
F16:	IN COMBINATION WITH CODE <xxxxxx>, WHICH LEADS TO DAR=STNREL IN DPLN, DESTNO MUST BE 0
F17:	DIAL NUMBER <xxxxxx> IS ASSIGNED TO A SKY DEVICE AND MAY NOT BE ENTERED AS A CONVERSION DESTINATION.
F18:	FAX1 @@@@@@@@@@@@ IS AN ALREADY CONFIGURED PHYSICAL STATION.
F19:	STATION NUMBER @@@@@@@@@@@@ IS IN USE.

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.