167.5.2 Advisories

 
H01:
NO VALUE FOR PARAMETER DNO ENTERED, PARAMETER DNOTON WILL BE IGNORED
H02:
FOR THE SOURCE NODE NUMBER <level2-level1-level0> THE PARAMETER SCRPPLAN
 
HAS BEEN CONFIGURED AS 0, THE SCRPTON WILL BE IGNORED
H03:
THE CIRCUIT WHICH REFERS TO THE NODE NUMBER MUST BE CONFIGURED
 
(AMO TDCSU: PARAMETER NNO)
H04:
THE SCREENING PATTERN PLAN <scrpplan> HAS NOT BEEN CONFIGURED
H05:
THE SCRPPLAN <scrpplan> HAS BEEN DELETED FOR THE SOURCE NODE NUMBER <level2-level1-level0>,
 
THEREFORE THE VALUE FOR PARAMETER SCRPTON WILL BE DELETED
H06:
NO DATA FOUND
H07:
THE SCREENING PATTERN <scrp> HAS NOT BEEN CONFIGURED,
 
OR HAS ALREADY BEEN DELETED
H08:
NO DATA CONFIGURED FOR THIS SOURCE NODE NUMBER <level2-level1-level0>
H09:
FIRST THE SCREENING PATTERN PLAN HAS TO BE ADDED,
 
THE PARAMETER SCRPPLAN WILL BE SET TO 0 NOW
H10:
THE VALUE FOR PARAMETER DNO HAS BEEN DELETED,
 
THE VALUE FOR PARAMETER DNOTON WILL ALSO BE DELETED
H11:
THE SCRPPLAN <scrpplan> HAS BEEN DELETED FOR THE SOURCE NODE NUMBER <level2-level1-level0>
H12:
ALL CONFIGURED DATA HAS BEEN DELETED,
 
THEREFORE THE SOURCE NODE NUMBER <level2-level1-level0> WILL ALSO BE DELETED
H13:
THE SCREENING PATTERNS HAVE NOT BEEN CONFIGURED
 
FOR THE FOLLOWING SOURCE NODE NUMBER(S)
H14:
THE SCRPTON SHOULD BE ADAPTED TO THE MODIFIED SCRPPLAN
 
 
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620
 © 09/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.