170.4 Parameter Description


AREA	Area within the Server
	Type of Input	:	1 bis 4 single values, optional
	Possible Values	:	LN	module of the line preiphery
			CHAN	channels
			FILE	module of the storage periphery with connected devices
	Default Value	:	LN

LINK	Type of status search function
	Type of Input	:	Single value, optional
	Possible Values	:	OR	a system section is displayed if at least one of the wanted states is set
			AND	a system section is only displayed if all wanted states have been set
	Default Value	:	OR
	Note	:	This parameter is only effective if something has been entered for parameter STATUS.

STATUS	Module states of the SERVER to be output
	Type of Input	:	1 bis 4 single values, optional
	Possible Values	:	NCR	not created
			CREA	created
			PRES	present
			INS	in service
			AMO	manually blocked by means of an AMO
			BLKY	manually blocked by means of a key
			DEF	blocked by dependability due to a fault
			CHECK	seized by dependability
			DYNINIT	hierarchically blocked
			UNACHLBC	hierarchically blocked LBC
			UNACHLCX	hierarchically blocked LCX
			ALL	all states
	Default Value	:	Only out-of-service states are output.
			The states INS and CHECK and the combination of NCR and NPR are not output.
	Note	:	During input the type of search can be affected by means of parameter LINK.
			In the case of memory periphery devices, parameter AREA=FILE, this parameter has no effect on the output.

UNIT	System part which is to carry out the STATUS interrogation
	Type of Input	:	Single value,optional
	Possible Values	:	A1	= Administration

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.