174.2.2
DEACTIVATE-SELS
Switch off a selection group, i.e., the state "OFF" is entered into the status code.
Procedure Overview
Command Code
Parameters
DEACTIVATE-SELS
SELGRNO=<number>;
Example
1.
Switch off selection group 2 without an entry in the queue.
Input:
DEACTIVATE-SELS:2;
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5
, ID:
P31003H31A0S107057620
©
09/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.