174.2.3
COLLECT-SELS
Switch off a selection group with an entry in the queue, i.e., the state "OFF_WITH_QUE" is entered into the status code. Otherwise, the function corresponds to ACTIVATE-SELS.
In the operation mode "fast output" it will be checked if the value for the selection group is bigger than 1. In this case an error message occurs.
Procedure Overview
Command Code
Parameters
COLLECT-SELS
SELGRNO=<number>;
Example
1.
Switch off selection group number 3 with queue
Input:
COLLECT-SELS:3;
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5
, ID:
P31003H31A0S107057620
©
09/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.