174.2.5 DISPLAY-SELS / REGENERATE-SELS

1.
Interrogate the operating states of the selection groups with output in list format (DISPLAY).
2.
Interrogate the operating states of the selection groups with output in position-oriented commands for the regeneration (SAVDB). There is only an output of the active selection groups (state "ON").
Procedure Overview
 
Command Code
Parameter
 
DISPLAY-SELS
[SELGRNO=<number>];
(1)
 
 
 
|REGENERATE-SELS
[SELGRNO=<number>];
(2)
Examples
1.
Interrogate the operating states of all selection groups
Input:
DISPLAY-SELS;
Output:
OPERATING CONDITIONS OF THE SELECTION GROUPS

SELGRNO OPERATING CONDITION

1 ON
2 STOP
3 STOP
4 STOP
2.
Interrogate the operating state of selection group 1:
Input:
DISPLAY-SELS:1;
Output:
OPERATING CONDITIONS OF THE SELECTION GROUPS

SELGRNO OPERATING CONDITION

1 ON
3.
Interrogate the operating states of all selection groups for the regeneration.
Input:
REGEN-SELS;
Output:
ACTIVATE-SELS:1;
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620
 © 09/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.