178.2.2 DISPLAY-SONUS

Displaying the table of switchover dates.

The table is read and the switchover dates found are compared with the date from the system. The output only shows dates that haven't yet expired. If no valid dates are found or if there is no such table, message H3 will be output.

If the function mode is set to AUTOMATIC, the message H4 will be output.

For each year, one line is output. The first column contains the switchover dates to daylight saving, the second those to standard time. If one of these dates is missing, its field will be left blank. If there are no entries for a certain year, there'll be no output for it.

Procedure Overview


Command Code	Parameter
DISPLAY-SONUS	;

Example

Displaying the switchover table

Input:

DISPLAY-SONUS;

Output:

+---------------------------------------+
| SWITCHOVER TO |
| DAYLIGHT SAVING STANDARD TIME |
|-------------------+-------------------|
| 1988-03-27 | 1988-09-25 |
| 1990-03-25 | |
| 1991-03-24 | 1991-09-29 |
| | 1992-09-27 |
|-------------------+-------------------|
| SWITCHOVER TIME |
| 02:00 HRS | 03:00 HRS |
+-------------------+-------------------+
ADJUSTED FUNCTION MODE OF SONUS - TASK : AUTOMATIC

H04: US-STANDARD APPLIES FOR THE AUTOMATIC TIME-SWITCHOVER.

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.