184.2.2
DEACTIVATE-SYNC
1.
Deactivation of a service for synchronization with SE.
If a service is deactivated via AMO-SYNC, it is no longer synchronized and all existing information relating to this service is scrapped. In addition, no more AMO commands will be collected for this AMO, until the service request the synchronisation again.
2.
Deactivation of synchronization during generation. (In this way, the AMO commands are not forwarded via the SE to the services but suppressed in the MMI).
Procedure Overview
Command Code
Parameter
DEACTIVATE-SYNC
TYP=SER,SERVICE=<param>; (1)
|TYP=GEN; (2)
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5
, ID:
P31003H31A0S107057620
©
09/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.