185.3.6 REGENERATE-SYNCA

The verb REGENERATE is used to output the data of the announcement table and the announcement matrices in the form of one or more position-oriented "ADD" commands. The commands can be regenerated for a specific table or a specific type.

Procedure Overview


Command Code	Parameter
REGENERATE-SYNCA	[SEL=ANNTYPE],[ANNTYPE=<number>],[TABTYPE=<param>];	(1)

	[\|SEL=ANNAME],ANNAME=<string>,[TABTYPE=<param>];

	[\|SEL=IDX],[ANREASON=<param>],TABTYPE=ANNMIOD \| ANNTONE;	(2)

	\|TABTYPE=ANNMCI,[COMPIDX=<number>];

	\|TABTYPE=ANNMITR,[ITR=<number>];	(3)

Examples

Regenerate the configuration for announcement type 33.

Input:

REGEN-SYNCA:ANNTYPE,33;

Output:

ADD-SYNCA:ANNTT,33,"ANN-TYPE 33",ON,5,,PACK,2,ON,HOLDLINE,1,ON,,,STASTO,3;
ADD-SYNCA:ANNMCI,WANNAOHK,6,33;
ADD-SYNCA:ANNMITR,DIDSD,0,33;
ADD-SYNCA:ANNMITR,SDOHK,1,33;
ADD-SYNCA:ANNMITR,ANNBUSY,8,33;
ADD-SYNCA:ANNMITR,SDBUSY,11,33
ADD-SYNCA:ANNMITR,SDBUSY,12,33;
ADD-SYNCA:ANNMIOD,ANNBUSY,33;
ADD-SYNCA:ANNMIOD,SDBUSY,33;

Regenerate the table for the preliminary tone and the return tone.

Input:

REGEN-SYNCA:IDX,,ANNTONE;

Output:

ADD-SYNCA:ANNTONE,DIDSD,PACK,INTDTN;
ADD-SYNCA:ANNTONE,ANNBUSY,HOLDLINE,BUSY;
ADD-SYNCA:ANNTONE,ANNOHK,,RNGBK;
ADD-SYNCA:ANNTONE,SDBUSY,,;
ADD-SYNCA:ANNTONE,SDOHK,,REORDER;

Regenerate announcement type for ITR group 11 and announcement reason WANNAOHK.

Input:

REGEN-SYNCA:IDX,WANNAOHK,ANNMITR,11;

Output:

ADD-SYNCA:ANNMITR,WANNAOHK,11,21;

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.