185.4 Parameter Description


ANNAME	Announcement name
	A wildcard (*) must not be used as first and/or last character when the announcement name is added or changed (SEL=ANNTYPE). In this case the command is rejected with message F10.
	Type of Input	:	Single value optional (ADD, CHANGE) mandatory (DELETE, DISPLAY, REGENERATE)
	Possible Values	:	Any text string, max. 16 characters
			(e.g.: "ANNOUNC_001" or "VPL_OUT_INFO")
	Default Value	:	Deletion of the structure element

ANNEXT	Next announcement type for chained announcements
	Type of Input	:	Single value, optional
	Possible Values	:	0 to 64
	Default Value	:	0 (no chained announcement)

ANNTYPE	Announcement type (assigns announcement properties to the table element)
	Type of Input	:	Single value, optional (ADD, TABTYPE=ANNTT) mandatory (ADD, TABTYPE=ANNMCI \| ANNMITR \| ANNMIOD) Single value, 1 to 5 chained single value and/or range of values optional (REGENERATE) mandatory (CHANGE, DELETE, DISPLAY)
	Possible Values	:	1 to 64

ANREASON	Reason for synchronized announcement
	Type of Input	:	Single value, 1 to 5 chained single value (&) mandatory (ADD, CHANGE, TABTYPE=ANNTONE optional (ADD for TABTYPE=ANNMCI DELETE, DISPLAY, REGENERATE, CHANGE)
	Possible Values		didsd	did start dialing
			sdbusy	suffix dialing when busy destination
			sdohk	suffix dialing when off hook destination
			annbusy	common announcement when busy destination
			annohk	common announcement when off hook destination
			wannaohk	wait announcement atnd console off hook
			wannhg	wait announcement call to hunting-group queue
			annccm	common announcement code calling multipl
			anknock	announcement when busy destination
			wanndns	wait announcement for day and night service
			blockpr	blocked precedence announcement
			unauthpr	unauthorized precedence announcement
			vaccode	vacant code announcement
			isolcode	isolated code announcement
			pracclim	precedence access limitation announcement
			busynequ	busy not equipped announcement
			attdque	attendant queue announcement
	Default Value		WANNAOHK	only for ADD ANNMCI

ANREP	Maximum number of repetitions for announcement
	Type of Input	:	Single value, optional
	Possible Values	:	0 to 255 (=infinity)
	Default Value	:	0

ANSTATE	Announcement state
	Type of Input	:	Single value, optional
	Possible Values	:	OFF ON	Announcement deactivated Announcement activated
	Default Value	:	OFF

ANSW	Answer to input request
	Type of Input	:	Single value, mandatory
	Possible Values	:	Y N	YES NO

ANTYNEW	Announcement type, new
	Type of Input	:	Single value, mandatory
	Possible Values	:	1 to 64

ANTYOLD	Announcement type to be replaced (old)
	Type of Input	:	Single value, 1 to 5 chained single value and/or range of values optional
	Possible Values	:	1 to 64

COMPIDX	Company index
	Type of Input	:	Single value, 1 to 5 chained single value and/or range of values mandatory (ADD) optional (CHANGE, DELETE, REGENERATE)
	Possible Values	:	0 to 9

DELAYTM	Delay timer for announcement start
	Type of Input	:	Single value, optional Verbs: ADD, CHANGE
	Possible Values	:	0 to 180
	Default Value	:	3

ITR	Internal traffic restriction group
	Type of Input	:	Single value, 1 to 5 chained single value and/or range of values mandatory (ADD) optional ( CHANGE, DELETE, REGENERATE)
	Possible Values	:	0 to 15

OPMODE	Operation mode of announcement type
	Type of Input	:	Single value, optional Verbs: ADD, CHANGE
	Possible values	:	STASTO CONT	Operation mode start/stop Operation mode continuous
	Default Value	:	STASTO

PRETONE	Preliminary tone for an announcement reason
	Type of Input	:	Single value, optional
	Possible Values	:	See parameter TONETYP1
	Default Value	:	RNGBK

RELLIMIT	Release limit to zero crossing without load
	Type of Input	:	Single value, optional Verbs: ADD, CHANGE
	Possible Values	:	1 to 255
	Default Value	:	5

BACKTONE	Return tone for announcement reason
	Type of Input	:	Single value, optional
	Possible Values	:	See parameter TONETYP1
	Default Value	:	RNGBK

SEL	Selection criterion used
	Type of Input	:	Single value, mandatory (CHANGE, DELETE) optional (REGENERATE)
	Possible Values	:	for verb = CHANGE
			ANNAME ANNTYPE	Announcement name Announcement type
			for verb = DELETE, DISPLAY, REGENERATE
			ANNAME ANNTYPE IDX	Announcement name Announcement type Index/indices for an announcement matrix

TABTYPE	Type of an announcement table or matrix
	Type of Input	:	Single value, mandatory (ADD, CHANGE, REGENERATE, SEL=IDX) Single value, 1 to 5 chained single value (&) mandatory (DELETE) optional (DISPLAY, REGENERATE, SEL=ANNTYPE \| ANNAME)
	Possible Values	:	valid for all verbs
			ANNMCI ANNMIOD ANNTONE ANNMITR ANNTT	Announcement matrix with company indices Announcement matrix independent of destination Announcement matrix for start and return tone Announcement matrix with ITR group indices Announcement type table
			Additionally, for verb = CHANGE
			ANNMALL	Handle all announcement matrices
			Additionally for verb = DISPLAY
			ANSES	Announcement device / announcement type table
			Additionally, for verb = DELETE
			ALLUSE	Delete announcement type from all type-specific announcement matrices: ANNMCI, ANNMITR, ANNMIOD

TONE1STA	Injection of tone type 1 at end of announcement
	Type of Input	:	Single value, optional
	Possible Values	:	OFF ON	Tone type deactivated Tone type activated
	Default Value	:	OFF

TONE2STA	Injection of tone type 2 after tone type 1
	Type of Input	:	Single value, optional
	Possible Values	:	OFF ON	Tone type deactivated Tone type activated
	Default Value	:	OFF

TONE3STA	Injection of tone type 3 after tone types 1 and 2
	Type of Input	:	Single value, optional
	Possible Values	:	OFF ON	Tone type deactivated Tone type activated
	Default Value	:	OFF

TONETYP1	Type of tone for first SIU tone
	Type of Input	:	Single value, optional
	Possible Values	:	The definitions correspond to the HICOM TONE TYPE set
			ALERT ANNICPT BONHK BUSY CAMP CBKALERT CMALTONE CONFTN CONG DATA DISCTONE DND EXTDTN EXTDTN2 FCAMP FRNGBK HOLD HOLDCCS HOLDEXT HOLDH1 HOLDH2 HOLDHUNT HOLDINT HOLDLINE HUNTGRUP IMPOSSFM INTDTN KNCONF LCRET LOCANN MOH MWI NACK NODIAL NOPO NOTALWD	Alert tone (expensive route) Announcement for attendant intercept B-party on hook Busy tone Camp-on/call waiting tone Callback alert tone Call monitoring alerting tone Conference tone Network congestion tone Data call tone for V25 Emergency disconnect tone Do not disturb tone External dial tone Second external dial tone First camp-on tone First burst of ringback tone Call waiting tone Hold tone code calling system (CCS) Hold tone external Hold tone hold 1 Hold tone hold 2 Hold tone hunting group Hold tone internal Hold the line please Announcement huntgroup queue At the moment not possible Internal dial tone Camp-on tone for conference LCR expensive tone Local announcement Music on hold Message waiting indication Negative acknowledgement tone Dial timeout tone (no digits dialed) Not possible Not allowed
			NOTREACH	Subscriber not reachable
			NU OVR OVRTN OVRWARN PACK PACKWD	Number obtainable tone Automatic override tone Override tone Override prewarning tone Positive acknowledgement tone Positive acknowledgement tone with dialing
			POSTDIAL REORDER RNGBK RTOTON1 RTOTON2 SPEC TEST VOICEMAL	Announcemen post dial Request of reorder tone Ringback tone Test for first tone receiver group Test for second tone receiver group Special dial tone Test transmitter tone VOICE MAIL
	Default Value	:	MOH

TONETYP2	Type of tone for second SIU tone
	Type of Input	:	Single value, optional
	Possible Values	:	See parameter TONETYP1
	Default Value	:	MOH

TONETYP3	Type of tone for third SIU tone
	Type of Input	:	Single value, optional
	Possible Values	:	See parameter TONETYP1
	Default Value	:	MOH

TONTM1	Duration of tone-type 1 connection (in seconds)
	Type of Input	:	Single value, optional
	Possible Values	:	0 to 255 (=infinity)
	Default Value	:	5

TONTM2	Duration of tone-type 2 connection (in seconds)
	Type of Input	:	Single value, optional
	Possible Values	:	0 to 255 (=infinity)
	Default Value	:	5

TONTM3	Duration of tone-type 3 connection (in seconds)
	Type of Input	:	Single value, optional
	Possible Values	:	0 to 255 (=infinity)
	Default Value	:	5

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.