186.2.2 CHANGE-TABT

Change entries in the rate period table. The limit value as well as the rate type of an entry can be changed. In this case, the limit values are resorted in ascending order.

If the limit value 2400 hrs. is changed and if it was not the last entry in the table, the next limit value is set to 2400 hrs. and the rate types are set to NTAR2.

If a limit value is changed to 12:00 a.m., all subsequent entries are deleted.

Procedure Overview


Command Code	Parameters
CHANGE-TABT	SEGTABLNO=<number>,TBLENTRY=<number>
	,{(min 1)GREWERT=<number>,TARTYPMO=<string>
	,TARTYPTU=<string>,TARTYPWE=<string> ,TARTYPTH=<string>,TARTYPFR=<string> ,TARTYPSA=<string>,TARTYPSU=<string>};

Examples

Changing the second entry to the limit value 0900 hrs. with night rate 1 for monday to friday. Rate type for saturday and rate type for sunday remain unchanged.

Input:

CHANGE-TABT:1,2,09-00,NTAR1,NTAR1;

In the fourth entry, the rate type for sunday is to be changed to night rate 2.

Input:

CHANGE-TABT:1,4,,,,,,,NTAR2;

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.