191.2.2 DELETE-TEXT

Delete an entry in the output text tables or an entire table by overwriting the original characters with blanks. The tabels can only be deleted one at a time.

Procedure Overview


Command Code	Parameter
DELETE-TEXT	TBL=OUTDAYC,ENTRY=<number>;

	\|TBL=OUTMONC,[ENTRY=<number>];

	\|TBL=SERVICE,[ENTRY=<param>];

	\|TBL=SPEED,[ENTRY=<number>];

	\|TBL=NETTYPE,[ENTRY=<param>];

	\|TBL=SWP,[ENTRY=<param>];

	\|TBL=CHOFCON,[ENTRY=<number>];

	\|TBL=SUBSID,[ENTRY=<number>];

	\|TBL=SIGDATA,[ENTRY=<number>];

	\|TBL=ROUTCC,[ENTRY=<number>];

	\|TBL=IDPP,[ENTRY=<param>];

	\|TBL=UNITERAS,[ENTRY=<param>];

	\|TBL=LISTTYPE,[ENTRY=<param>];

	\|TBL=EXPENS,[ENTRY=<number>];

	\|TBL=CONNTYPE,[ENTRY=<param>];

	\|TBL=SUPLSERV,[ENTRY=<number>];

	\|TBL=ZONE,[ENTRY=<param>];

	\|TBL=CARRIER,[ENTRY=<number>];

	\|TBL=COPIN,[ENTRY=<number>];

	\|TBL=UNANS,[ENTRY=<number>];

	\|TBL=RURAL,[ENTRY=<number>];

	\|TBL=AOCTYPE,[ENTRY=<number>];

	\|TBL=CALCTYPE,[ENTRY=<param>];

	\|TBL=INFOTYPE,[ENTRY=<param>];

Example

Deleting a text string in entry 1 of the ’Outdayc’ table:

TBL=OUTDAYC
ENTRY=1

Input:

DELETE-TEXT:TBL=OUTDAYC,ENTRY=1;

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.