194.3 Parameter Description

 
ATNDNO
Attendant telephone number
(see AMO ACSU)
 
Type of Input
:
single value, optional
 
 
 
mandatory (ADD, CHANGE)
 
Possible Values
:
maximum of 6 digits
 
 
 
0 to 999999
 
 
 
 
 
BCHL
Number of the ISDN B-channel
 
Type of Input
:
single value, range, optional
 
 
 
mandatory (ADD, CHANGE)
 
Possible Values
:
0 to 30
 
 
 
 
 
CCT
Circuit number
 
Type of Input
:
single value, optional
 
 
 
mandatory (ADD, CHANGE)
 
Possible Values
:
0 to 121
 
 
 
 
LTG
Line trunk group
 
Type of Input
:
single value, optional
 
 
 
mandatory (ADD, CHANGE)
 
Possible Values
:
1
 
 
 
 
LTU
Line trunk unit
 
Type of Input
:
single Value, optional
 
 
 
mandatory (ADD, CHANGE)
 
Possible Values
:
1 to 99
 
Note
:
LTU 16 is used Hicom internal.
 
 
 
 
 
SLOT
Specification of the mounting pitch in the LTU
 
Type of Input
:
single value, optional
 
 
 
mandatory (ADD, CHANGE)
 
Possible Values
:
1 to 121
A suitable module must be configured for the slot addressed by PEN (AMO BCSU).
The possible Slot values depend on the systems architecture and can be found in the BCSU AMO description.
 
 
 
 
 
STNO
Imaginary station number
 
Type of Input
:
single value, optional
 
 
 
mandatory (ADD, CHANGE)
 
Possible Values
:
maximum of 22 digits (ATND, INC, INT, MTLC, OUTG)
 
 
 
 
 
TBL
Name of table required
 
Type of Input
:
single value, optional
 
 
 
mandatory (ADD, CHANGE)
 
Possible Values
:
ATND = Attendant number table
 
 
 
INC = Incoming calls
 
 
INT = Internal calls
 
 
 
MTLC = PBX trunk number table
 
 
 
OUTG = Outgoing calls
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620
 © 09/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.