195.4.2 INPUT-TRACA

195.4.2.1 General

The action INPUT-TRACA is only used for WRITE-READ access and cannot be entered by the operator at the administration and maintenance terminal (AMT). Only the text shown below is displayed at the AMT as an input request to the operator (the asterisk which follows the text indicates the ready state):

TRACER INPUT IN <processor name> PLEASE:
*

This output text also indicates that the AMO has successfully executed the previous command.

The following commands (CMD) are possible:


CMD=	COPY,AREA=<string>-<param>,FILE=<string>;
CMD=	DISPLAY,FILETYPE=<param>;
CMD=	DISPLAY,FILETYPE=FILE,FILE=<string>;
CMD=	DA,[CNT=<number>],[LEN=<number>],TYPE=ALL;
	(Subsequent parameter entries are disregarded by the AMO)
CMD=	DA,[CNT=<number>],[LEN=<number>],[TYPE=<param>],,,TEST=SELMSG;
	(Other parameter entries are disregarded by the AMO)
CMD=	DA,[CNT=<number>],[LEN=<number>],[TYPE=<param>]
	,[DISPLACE=<param>,VAL=<hex>,TEST=<param>];
CMD=	DB,[CNT=<number>],[LEN=<number>],TYPE=ALL;
	(Subsequent parameter entries are disregarded by the AMO)
CMD=	DB,[CNT=<number>],[LEN=<number>],[TYPE=<param>],,,TEST=SELMSG;
	(Other parameter entries are disregarded by the AMO)
CMD=	DB,[CNT=<number>],[LEN=<number>],[TYPE=<param>]
	,[DISPLACE=<param>,VAL=<hex>,TEST=<param>];
CMD=	DF,[CNT=<number>],[LEN=<number>],TYPE=ALL;
	(Subsequent parameter entries are disregarded by the AMO)
CMD=	DF,[CNT=<number>],[LEN=<number>],[TYPE=<param>],,,TEST=SELMSG;
	(Other parameter entries are disregarded by the AMO)
CMD=	DF,[CNT=<number>],[LEN=<number>],[TYPE=<param>]
	,[DISPLACE=<param>,VAL=<hex>,TEST=<param>];
CMD=	DL,[CNT=<number>],[LEN=<number>],TYPE=ALL;
	(Subsequent parameter entries are disregarded by the AMO)
CMD=	DL,[CNT=<number>],[LEN=<number>],[TYPE=<param>],,,TEST=SELMSG;
	(Other parameter entries are disregarded by the AMO)
CMD=	DL,[CNT=<number>],[LEN=<number>],[TYPE=<param>], ,[DISPLACE=<param>,VAL=<hex>,TEST=<param>];
CMD=	DN,NO=<number>,[LEN=<number>],TYPE=ALL;
	(Subsequent parameter entries are disregarded by the AMO)
CMD=	DN,NO=<number>,[LEN=<number>],[TYPE=<param>],,,TEST=SELMSG;
	(Other parameter entries are disregarded by the AMO)
CMD=	DN,NO=<number>,[LEN=<number>],[TYPE=<param>]
	,[DISPLACE=<param>,VAL=<hex>,TEST=<param>];
CMD=	DA-T, DB-T, DF-T, DL-T, DN-T with the same branches like DA,DB,DF,DL,DN
CMD=	END;
CMD=	MAXNO,[MAXNO=<number>];
CMD=	MSGLEN,TRACEPT=<param>,CONDGRP=[param],[LEN=<number>];
CMD=	OFF;
CMD=	ON,[STYPE=BUF];
CMD=	ON,STYPE=HD,FILE=<string>,[MAXBLOCK=<number>],WRAP=<param>;
	[OVERWRT=<J>], [POOLSIZE=<number>];
CMD=	P,[UNIT=<string>];
CMD=	RES,[RESOBJ=<param>];
CMD=	RST,STYPE=<param>;
CMD=	SELMSG,TRACEPT=<param>,CONDGRP=G1\|...\|G4,COND=ALL;
	(Subsequent parameter entries are disregarded by the AMO)
CMD=	SELMSG,TRACEPT=<param>,CONDGRP=G1\|...\|G4,COND=CD1\|...\|CD8
	,FLDTYPE=BYTE,DISPLACE=<number>,VAL=<hex>,[TEST=<param>];
CMD=	SELMSG,TRACEPT=<param>,CONDGRP=G1\|...\|G4,COND=CD1\|...\|CD8
	,FLDTYPE=DEST,VAL=<hex>,[TEST=<param>];
CMD=	SELMSG,TRACEPT=<param>,CONDGRP=G1\|...\|G4,COND=CD1\|...\|CD8
	,FLDTYPE=EV,VAL=<hex>,[TEST=<param>];
CMD=	SELMSG,TRACEPT=<param>,CONDGRP=G1\|...\|G4,COND=CD1\|...\|CD8
	,FLDTYPE=PST,DISPLACE=<number>,BITPOS=<param>,[TEST=<param>];
CMD=	SELMSG,TRACEPT=<param>,CONDGRP=G1\|...\|G4,COND=CD1\|...\|CD8
	,FLDTYPE=SRC,VAL=<hex>,[TEST=<param>];
CMD=	SELMSG,TRACEPT=<param>,CONDGRP=G1\|...\|G4,COND=CD1\|...\|CD8
	,FLDTYPE=SEVT,VAL=<hex>,[TEST=<param>];
CMD=	SELMSG,TRACEPT=<param>,CONDGRP=G1\|...\|G4,COND=CCD1\|...\|CCD8
	,STYPE=ADD\|SET\|SUB,AKTPOS=<number>,TARGETPO=<number>
	,[TARGETTP=<param>],[TARGETGRP=G1\|...\|G4],[TARGETCD=CD1\|...\|CD8]
	,[LOCK=<param>],[NUMCD=<param>],[CONVERT=<param>];
CMD=	SELMSG,TRACEPT=<param>,CONDGRP=G1\|...\|G4,COND=CCD1\|...\|CCD8
	,STYPE=DEL,[TARGETTP=<param>],[TARGETGRP=G1\|...\|G4]
	,[TARGETCD=CD1\|...\|CD8],[LOCK=<param>],[NUMCD=<param>];
CMD=	SELMSG,TRACEPT=<param>,CONDGRP=G1\|...\|G4,[COND=OFF]
	(Other parameter entries are disregarded by the AMO)
CMD=	SELMSG,TRACEPT=<param>,CONDGRP=OFF
	(Other parameter entries are disregarded by the AMO)
CMD=	SELSTOP,STYPE=<param>;
CMD=	SETLAN,CONDGRP=<param>,TYPE=<param>;
CMD=	STA,[INFO=<param>];
CMD=	USER,[TEXT=<string>];

Before the Tracer is started a selection of the tracepoints and traceobjects, which shall be recorded, has to be made. This is done with the command SELMSG.

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.