195.6 Examples

195.6 Examples

Start AMO TRACA (in ADS), control of tracer in A1

<EXEC-TRACA:A1;

AMO TRACA VARIANT/VERSION L2/001 OF 2001-04-18
TRACER VARIANT/VERSION L2/007 OF 2001-04-18
TRACER INPUT IN A1 PLEASE:

The user input request is followed by an asterisk to indicate that the user may now enter the next command.

Example 1: basic example

The buffer and all the selection tables of the StandardTracer must be reset.

TRACER INPUT IN A1 PLEASE:

Only the first 14 bytes of the OS_SEND and OS_RECEIVE messages are stored in the memory.

*MSGLEN, OS, G1, 14;

TRACER INPUT IN A1 PLEASE:

A maximum of 100 objects are entered in the trace buffer of the StandardTracer:

TRACER INPUT IN A1 PLEASE:

Only the messages received by the AMC (task set value = H’33) or by an AMO
(task set value = H’34) are to be selected:

*SELMSG, RCV, G1, CD1, DEST, 33&34;

TRACER INPUT IN A1 PLEASE:

The StandardTracer is activated:

TRACER INPUT IN A1 PLEASE:

Get long information of StandardTracer:

*******************************************************************************
* STANDARD TRACER *
*******************************************************************************
MAX:100 SELOBJ:34 ACTOBJ:34 TRC:ON STARTCD:D STOPCD:D
RST:OFF PETRACD:D STOPALLCD:D

SELECTIONS AT TRACEPOINT RCV :
CONDITIONGROUP 1 ( MAX. MESSAGE LENGTH = 14 BYTES ) :
CONDITION 1: BYTE 0 = 33 34
*******************************************************************************
* COMMON INFORMATION *
*******************************************************************************
USER:
SERI:OS

BUFFERS OF THE RESIDENT TRACER: 7 BUFFERS AT 64000 BYTE
STDTR:1 FLAGTR:2 AUTOTR:1 RDSTR:0 FREE:3
TRACER INPUT IN A1 PLEASE:

Deactivation of StandardTracer:

TRACER INPUT IN A1 PLEASE:

Interrogate number of trace objects in StandardTrace buffer:

*******************************************************************************
* STANDARD TRACER *
*******************************************************************************
MAX:100 SELOBJ:91 ACTOBJ:91 TRC:OFF STARTCD:D STOPCD:D
TRACER INPUT IN A1 PLEASE:

Output of the first 100 trace objects of the StandardTracer. Since there are only 91 objects in the buffer of the StandardTracer, only 91 objects are output.

The abbreviations in the header are defined as follows:

CURNO = Object number
SDNO = SD number for CP and DH, or type of task in the case of PP
TY = Type of object
DE = Destination task
SC = Source task
PR = Processor in sequence no.
EV = Event code

OUTPUT OF STANDARD TRACER BUFFER
CURNO TY SDNO DE SC PR EV MESSAGE IN HEX (ASCII)
1 RCV 34 E5 1 20 34E5019020010301 88E300000054 4... ........T
2 RCV 34 E5 1 24 34E5019124010301 88E3000000FF 4...$.........
3 RCV 34 E5 1 24 34E5019224010301 88E300000101 4...$.........
4 RCV 34 E5 1 24 34E5019324010301 88E3000002FF 4...$.........
5 RCV 34 E5 1 24 34E5019424010301 88E3000003FF 4...$.........
6 RCV 34 E5 1 24 34E5019524010301 88E3000004FF 4...$.........
7 RCV 34 E5 1 24 34E5019824010301 88E3000005FF 4...$.........
8 RCV 34 E5 1 24 34E5019A24010301 88E3000006FF 4...$.........
9 RCV 34 E5 1 24 34E5019B24010301 88E3000007FF 4...$.........
.
.
.
89 RCV 33 34 1 9 333401EC09132500 131200020154 34....%......T
90 RCV 33 38 1 1 333801EC01132500 131200020154 38....%......T
91 RCV 34 33 1 1 343301EC01132500 131200020154 43....%......T
H01: NO FURTHER OBJECT IS IN THE BUFFER
TRACER INPUT IN A1 PLEASE:

Output of last 3 objects in the buffer of the standard tracer

OUTPUT OF STANDARD TRACER BUFFER
CURNO TY SDNO DE SC PR EV MESSAGE IN HEX (ASCII)
89 RCV 33 34 1 9 333401EC09132500 131200020154 34....%......T
90 RCV 33 38 1 1 333801EC01132500 131200020154 38....%......T
91 RCV 34 33 1 1 343301EC01132500 131200020154 43....%......T
TRACER INPUT IN A1 PLEASE:

Example 2: Selection of messages with bit mask (for powerset)

All messages of an AMO (task value = H’34) should be selected, if the message byte 1 contains the bit mask H’E5.

The buffer and all selection tables of the StandardTracer are reset.

TRACER INPUT IN A1 PLEASE:

*SELMSG, OS, G1,CD1, DEST, 34;

TRACER INPUT IN A1 PLEASE:

*SELMSG, OS, G1, CD2, PST, 1, BIT1&BIT6&&BIT8&BIT3;

TRACER INPUT IN A1 PLEASE:

Output of the tracer status

*******************************************************************************
* STANDARD TRACER *
*******************************************************************************
MAX:UNLTD SELOBJ:0 ACTOBJ:0 TRC:OFF STARTCD:D STOPCD:D
RST:OFF PETRACD:D STOPALLCD:D

SELECTIONS AT TRACEPOINT SD :
CONDITIONGROUP 1 ( MAX. MESSAGE LENGTH = 16 BYTES ) :
CONDITION 1: BYTE 0 = 34
CONDITION 2: BYTE 1 = BIT1 BIT3 BIT6 BIT8
SELECTIONS AT TRACEPOINT RCV :
CONDITIONGROUP 1 ( MAX. MESSAGE LENGTH = 16 BYTES ) :
CONDITION 1: BYTE 0 = 34
CONDITION 2: BYTE 1 = BIT1 BIT3 BIT6 BIT8
*******************************************************************************
* COMMON INFORMATION *
*******************************************************************************
USER:
SERI:OS

BUFFERS OF THE RESIDENT TRACER: 7 BUFFERS AT 64000 BYTE
STDTR:0 FLAGTR:2 AUTOTR:1 RDSTR:0 FREE:4

READ BUFFER: 1 BUFFER AT 64000 BYTE
TYPE:STANDARD BEGOBJ:1 ENDOBJ:68 READPOINTER:37
TRACER INPUT IN A1 PLEASE:

Only received messages (RCV) should be selected when, additional to the prior conditions, bit 6 (= H’20) is contained in message byte 4.

*SELMSG, RCV, G1, CD3, PST, 4, BIT6;
TRACER INPUT IN A1 PLEASE:

Output of selection data of the StandardTracer

SELECTIONS AT TRACEPOINT SD :
CONDITIONGROUP 1 ( MAX. MESSAGE LENGTH = 16 BYTES ):
CONDITION 1: BYTE 0 = 34
CONDITION 2: BYTE 1 = BIT1 BIT3 BIT6 BIT7 BIT8

SELECTIONS AT TRACEPOINT RCV :
CONDITIONGROUP 1 ( MAX. MESSAGE LENGTH = 16 BYTES ):
CONDITION 1: BYTE 0 = 34
CONDITION 2: BYTE 1 = BIT1 BIT3 BIT6 BIT7 BIT8
CONDITION 3: BYTE 4 = BIT6
TRACER INPUT IN A1 PLEASE:

Output of messages between lower (5) and upper (12) limit

OUTPUT OF STANDARD TRACER BUFFER
CURNO TY SDNO DE SC PR EV MESSAGE IN HEX (ASCII)
5 SD 34 E5 13 A 34E513760A130900 13030C34020154 4.............T
6 SD 34 E5 13 23 34E5137623130900 1303BE00020136 4..#..........6
7 RCV 34 E5 13 23 34E5137623130900 1303BE00020136 4..#..........6
8 SD 34 E5 13 2 34E5137602130900 13030000020100 4..v...........
9 SD 34 E5 13 2F 34E513762F130900 13030001020154 4
10 RCV 34 E5 13 2F 34E513762F130900 13030001020154 4
11 SD 34 E5 13 29 34E5137629130900 13030550 4
12 RCV 34 E5 13 29 34E5137629130900 13030550 4
TRACER INPUT IN A1 PLEASE:

Example 3: Tracing of LAN-DATA; Storing with COPY

LAN objects of the ethernet layer with the values H’19 or H’1A in byte 5 are to be selected:

The buffer and all selection tables of the StandardTracer are reset.

TRACER INPUT IN A1 PLEASE:

*SELMSG, LAN, G1, CD1, BY, 5, 19&1A;

H10: TRACEPOINTS SET: ETHSD ETHRV
TRACER INPUT IN A1 PLEASE:

Additional LAN objects of the TCP layer with the value H’77 in byte 0 are to be selected:

*SELMSG, LAN, G2, CD1, BY, 0, 77;

*SETLAN, G2, TCP;

TRACER INPUT IN A1 PLEASE:

Output of the tracer status

*******************************************************************************
* STANDARD TRACER *
*******************************************************************************
MAX:UNLTD SELOBJ:0 ACTOBJ:0 TRC:OFF STARTCD:D STOPCD:D
RST:OFF PETRACD:D STOPALLCD:D

SELECTIONS AT TRACEPOINT LAN :
CONDITIONGROUP 1 ( MAX. MESSAGE LENGTH = 16 BYTES ) :
SELECTED LAN DATA: ETHSD ETHRV
CONDITION 1: BYTE 5 = 19 1A
CONDITIONGROUP 2 ( MAX. MESSAGE LENGTH = 16 BYTES ) :
SELECTED LAN DATA: TCP
CONDITION 1: BYTE 0 = 77
*******************************************************************************
* COMMON INFORMATION *
*******************************************************************************
USER:
SERI:OS

BUFFERS OF THE RESIDENT TRACER: 7 BUFFERS AT 64000 BYTE
STDTR:0 FLAGTR:2 AUTOTR:1 RDSTR:0 FREE:4

READ BUFFER: 1 BUFFER AT 64000 BYTE
TYPE:STANDARD BEGOBJ:1 ENDOBJ:68 READPOINTER:37
TRACER INPUT IN A1 PLEASE:

Activating and deactivating the StandardTracer and displaying the first 8 trace objects:

OUTPUT OF STANDARD TRACER BUFFER
CURNO TY OBJECT IN HEX (ASCII)
1 TCP 77E513760A130900 13030C34020154 4.............T
2 ETHSD 34E5137623190900 1303BE00020136 4..#..........6
3 ETHRV 34E5137623190900 1303BE00020136 4..#..........6
4 TCP 77E5137602130900 13030000020100 4..v...........
5 ETHSD 34E513762F1A0900 13030001020154 4
6 ETHRV 34E513762F1A0900 13030001020154 4
7 TCP 77E5137629130900 13030550 4
8 TCP 77E5137629130900 13030550 4
TRACER INPUT IN A1 PLEASE:

Storing of StandardTrace buffer into a hard disk file:

*COPY,STDTR,":PAS:TRACER/TRACEBUF1";

H15: WRITING OF TRACE BUFFER COMPLETED
TRACER INPUT IN A1 PLEASE:

Display file status of the file ":PDS:TRACER/TRACEBUF2"

*DISPLAY,FILE,":PDS:TRACER/TRACEBUF2";

OUTPUT OF STANDARD TRACER FILE :PDS:TRACER/TRACEBUF2

+------------+-----------+-----------+---------------------+------+
| BLOCK | CURNO-BEG | CURNO-END | TIME | INFO |
+------------+-----------+-----------+---------------------+------+
| 1 | 1 | 1708 | 2001-04-25 13:44:17 | |
| 2 | 1709 | 2612 | 2001-04-25 13:45:15 | |
+------------+-----------+-----------+---------------------+------+
TRACER INPUT IN A1 PLEASE:

Terminate AMO TRACS

Example 4: Storing selection table

Saving the selection criterions

H23: WRITING TRACET SELECTION TABLES FINISHED
TRACER INPUT IN A1 PLEASE:

Restore selectiontables from file:

*COPY,TAB-HD,":PAS:TRACER/SELTAB";

SELECTIONS AT TRACEPOINT SD :
CONDITIONGROUP 1 ( MAX. MESSAGE LENGTH = 16 BYTES ) :
CONDITION 1: BYTE 0 = 34
CONDITION 2: BYTE 1 = BIT1 BIT3 BIT6 BIT7 BIT8

SELECTIONS AT TRACEPOINT RV :
CONDITIONGROUP 1 ( MAX. MESSAGE LENGTH = 16 BYTES ) :
CONDITION 1: BYTE 0 = 34
CONDITION 2: BYTE 1 = BIT1 BIT3 BIT6 BIT7 BIT8
COPY SELECTIONS FOR WHICH TRACEPOINTS?

H24: READING TRACER SELECTION TABLES FINISHED
TRACER INPUT IN A1 PLEASE:

Example 5: HD-Tracen (StandardTracer)

All OS messages (SD and RV) will be selected. Messagelength will be set to 120 Byte.

SELNA,OS,G1,ALL;

TRACER INPUT IN A1 PLEASE:
*NALAE,OS,G1,120;

A StandardTracer file is created.

*ON,HD,":PDS:TRACER/HD-TRACE1";

H19: :PDS:TRACER/HD-TRACE1 WITH 625 KB CREATED
H31: TRACE BUFFER POOL WITH 1250 KB CREATED

Output status of StandardTracer:

TRACER INPUT IN A1 PLEASE:
*STA,STDTR

********************************************************************************
* STANDARD TRACER *
********************************************************************************
MAX:UNBEG SELOBJ:579 ACTOBJ:579 TRC:EIN STARTBD:D STOPBD:D
RST:AUS PETRABD:D STOPALLBD:D

SELECTIONS AT TRACEPOINT SD :
CONDITIONGROUP 1 ( MAX. MESSAGE LENGTH = 120 BYTES ) :
ALL MESSAGES ARE ENTERED INTO THE TRACE BUFFER

SELECTIONS AT TRACEPOINT RV :
CONDITIONGROUP 1 ( MAX. MESSAGE LENGTH = 120 BYTES ) :
ALL MESSAGES ARE ENTERED INTO THE TRACE BUFFER

STANDARD TRACER FILE :PDS:TRACER/HD-TRACE1
+------------+-----------+-----------+-------+
| BLOCK | CURNO-BEG | CURNO-END | INFO |
+------------+-----------+-----------+-------+
| 1-2 | 1 | 1287 | |
| 3-10 | 0 | 0 | LEER |
+------------+-----------+-----------+-------+
********************************************************************************
* COMMON INFORMATION *
********************************************************************************
USER:
SERI:OS

BUFFERS OF THE RESIDENT TRACER: 7 BUFFERS AT 64000 BYTE
STDTR:6 FLAGTR:0 AUTOTR:1 RDSTR:0 FREI:0

TRACE BUFFER POOL: 20 BUFFER WITH 64000 BYTE
STDTR:1 FLAGTR:0 DISPLAY:0 RDSTR:0 FREI:19
TRACER INPUT IN A1 PLEASE:

Display status of StandardTracer file

OUTPUT OF STANDARD TRACER FILE :PDS:TRACER/HD-TRACE1
+------------+-----------+-----------+---------------------+------+
| BLOCK | CURNO-BEG | CURNO-END | TIME | INFO |
+------------+-----------+-----------+---------------------+------+
| 11 | 5974 | 6608 | 2001-05-22 11:47:37 | |
| 12 | 6609 | 7181 | 2001-05-22 11:47:38 | |
| 13 | 7182 | 7792 | 2001-05-22 11:47:42 | |
| 4 | 1865 | 2458 | 2001-05-22 11:47:22 | |
| 5 | 2459 | 3045 | 2001-05-22 11:47:23 | |
| 6 | 3046 | 3616 | 2001-05-22 11:47:25 | |
| 7 | 3617 | 4216 | 2001-05-22 11:47:26 | |
| 8 | 4217 | 4789 | 2001-05-22 11:47:27 | |
| 9 | 4790 | 5389 | 2001-05-22 11:47:28 | |
| 10 | 5390 | 5973 | 2001-05-22 11:47:30 | |
+------------+-----------+-----------+---------------------+------+
TRACER INPUT IN A1 PLEASE:

Output of the StandardTracer file:

TRACER INPUT IN A1 PLEASE:
*DF-T,5,16;

OUTPUT OF STANDARD TRACER FILE :PDS:TRACER/HD-TRACE1
LFDNR TY ZDNR DE SC PR EV MELDUNG IN HEX (ASCII)
3617 SD 2C 2A 1 6E 2C2A01986E010000 150008FFFF085A53 ,*..n.........ZS
3618 SD E5 E5 10 0 E5E510E000100000 00000000 ............
3619 RV E5 E5 10 0 E5E510E000100000 00000000 ............
3620 SD 1 1 1 16 010101D116000000 FFFF000002012C01 ..............,.
3621 RV 1 1 1 16 010101D116000000 FFFF000002012C01 ..............,.
TRACER INPUT IN A1 PLEASE:

Switch off StandardTracer

TRACER INPUT IN A1 PLEASE:

Status of StandardTracer file:

OUTPUT OF STANDARD TRACER FILE :PDS:TRACER/HD-TRACE1
+------------+-----------+-----------+---------------------+------+
| BLOCK | CURNO-BEG | CURNO-END | TIME | INFO |
+------------+-----------+-----------+---------------------+------+
| 21 | 12130 | 12802 | 2001-05-22 11:48:32 | |
| 22 | 12803 | 13328 | 2001-05-22 11:48:33 | |
| 23 | 13329 | 14059 | 2001-05-22 11:48:48 | |
| 24 | 14060 | 14581 | 2001-05-22 11:48:49 | |
| 25 | 14582 | 15190 | 2001-05-22 11:48:58 | ENDE |
| 16 | 9100 | 9758 | 2001-05-22 11:48:08 | |
| 17 | 9759 | 10376 | 2001-05-22 11:48:18 | |
| 18 | 10377 | 10958 | 2001-05-22 11:48:19 | |
| 19 | 10959 | 11538 | 2001-05-22 11:48:21 | |
| 20 | 11539 | 12129 | 2001-05-22 11:48:22 | |
+------------+-----------+-----------+---------------------+------+
TRACER INPUT IN A1 PLEASE:

Output of StandardTracer file:

*DN,12800-12805,16;

OUTPUT OF STANDARD TRACER FILE :PDS:TRACER/HD-TRACE1
LFDNR TY ZDNR DE SC PR EV MELDUNG IN HEX (ASCII)
12800 ZEIT 2001-05-22 11:48:32:440
12800 RV 1 97 1 0 0197018800000900 001007000201705C ..............p.
12801 ZEIT 2001-05-22 11:48:32:440
12801 SD 1 1 1 D 010101890D0040B1 00000201705C40B1 ............p...
12802 ZEIT 2001-05-22 11:48:32:440
12802 RV 1 1 1 D 010101890D0040B1 00000201705C40B1 ............p...
12803 ZEIT 2001-05-22 11:48:32:440
12803 SD 33 38 1 1 3338015001131100 1308000201545241 38.P.........TRA
12804 ZEIT 2001-05-22 11:48:32:440
12804 SD E5 E5 10 0 E5E510E000100000 00000000 ............
12805 ZEIT 2001-05-22 11:48:32:440
12805 RV E5 E5 10 0 E5E510E000100000 00000000 ............
TRACER INPUT IN A1 PLEASE:

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.