195.7 Parameter Description

 
AKTPOS
Used in command: SELMSG;
 
 
specifies the position of the byte in current message (setting conditionals conditions)
 
Type of Input
:
Single value, mandatory
 
Possible Values
:
0 - 12000
 
 
 
 
 
 
ANS
Used in command: COPY, ON;
 
specifies if copy is to continue
 
Type of Input
:
Single value, mandatory
 
Possible Values
:
Y
N
Yes
No
 
 
 
 
 
AREA
Used in command: COPY;
areas for which the command is valid
 
Type of Input
:
single Value, mandatory
 
Possible Values
 
STDTR
StandardTracer buffer
 
 
 
TAB-HD
save selection table
 
 
 
HD-TAB
read selection table
 
 
 
 
 
BITPOS
Used in command: SELMSG;
 
Bitpositions which may be used for building a byte mask for mask comparison
 
Type of Input
:
Single value, mandatory or
 
 
 
linked Single values and/or range entries,
 
 
 
mandatory
 
Possible Values
:
BIT1
Setting the 1. bit of a byte
 
 
 
BIT2
Setting the 2. bit of a byte
 
 
 
BIT3
Setting the 3. bit of a byte
 
 
 
BIT4
Setting the 4. bit of a byte
 
 
 
BIT5
Setting the 5. bit of a byte
 
 
 
BIT6
Setting the 6. bit of a byte
 
 
 
BIT7
Setting the 7. bit of a byte
 
 
 
BIT8
Setting the 8. bit of a byte
 
 
 
 
 
BLOCKNO
Used in command: DN, DN-T;
specifies the block number on the harddisk
 
Type of Input
:
Single value, mandatory
 
Possible Values
:
1 - 65535
 
 
 
 
 
 
CMD
Branch parameter,
 
indicates the tracer command
 
Type of Input
:
Single value, mandatory
 
Type of Input
:
Single value, mandatory
 
Possible Values
:
OFF, USER, DA, DB, DF, DISPLAY, DL, DN, ON, COPY, END, MAXNO,MSGLEN, P, RES, RST, SELMSG, SELSTOP, SETLAN, STA, DA-T, DB-T, DF-T, DL-T, DN-T
 
 
 
(for explanation see Functional Overview)
 
 
 
 
 
CNT
Used in commands: DA, DB, DF, DL, DA-T, DB-T, DF-T, DL-T, DN-T;
 
indicates number of trace objects to be output
 
Type of Input
:
Single value, optional
 
Possible Values
:
1 - 65535
 
Default Value
:
10
 
 
 
 
 
 
COND
Used in commands: SELMSG
 
branch parameter, specifies which condition is set.
 
Type of Input
:
Single value, optional
 
Possible Values
:
ALL
Select all messages
 
 
 
OFF
Deactivate message selection for a group
 
 
 
 
or deactivate selection at gate trace points
 
 
 
CD1
1st condition
 
 
 
CD2
2nd condition
 
 
 
CD3
3rd condition
 
 
 
CD4
4th condition
 
 
 
CD5
5th condition
 
 
 
CD6
6th condition
 
 
 
CD7
7th condition
 
 
 
CD8
8th condition
 
 
 
CCD1
1st conditional condition (SELMSG only)
 
 
 
CCD2
2nd conditional condition (SELMSG only)
 
 
 
CCD3
3rd conditional condition (SELMSG only)
 
 
 
CCD4
4th conditional condition (SELMSG only)
 
 
 
CCD5
5th conditional condition (SELMSG only)
 
 
 
CCD6
6th conditional condition (SELMSG only)
 
 
 
CCD7
7th conditional condition (SELMSG only)
 
 
 
CCD8
8th conditional condition (SELMSG only)
 
Default Value
:
OFF
 
 
 
 
 
 
CONDGRP
Used in commands: MSGLEN, SELMSG, SETLAN;
 
specifies group for which conditions are to be set
 
Type of Input
:
Single value, optional (SELMSG)
 
 
 
Single value, mandatory (MSGLEN, SETLAN)
 
Possible Values
:
For MSGLEN, SETLAN:
 
 
 
G1
Condition group 1
 
 
 
G2
Condition group 2
 
 
 
G3
Condition group 3
 
 
 
G4
Condition group 4
 
 
:
For SELMSG:
 
 
 
G1
Condition group 1
 
 
 
G2
Condition group 2
 
 
 
G3
Condition group 3
 
 
 
G4
Condition group 4
 
 
 
OFF
Deactivate message selection at a trace point
 
Default Value
:
OFF
 
 
 
 
 
 
DISPLACE
Used in commands: DA, DB, DF, DL, DN, DA-T, DB-T, DF-T, DL-T, DN-T, SELMSG;
 
indicates the displacement of the byte in the trace object which is to be compared
 
with the values of parameter VAL
 
Type of Input
:
Single value,
 
 
 
mandatory in SELMSG
optional in DA, DB, DF, DL, DN, DA-T, DB-T, DF-T, DL-T, DN-T, SELMSG
 
Possible Values
:
0 - 12000
 
 
 
 
 
FILE
Used in command: COPY, DISPLAY, ON;
defines the file name of a file for storing the trace buffer on hard disk.
 
Type of Input
:
Single value, mandatory
 
Possible Values
:
valid file name (e.g. ":PAS:TEST" or ":DBD:TEST")
or "*" (just in DISPLAY) which stands for the last filename, which has been used in ON or DISPLAY.
 
 
 
 
 
FILETYPE
Used in command: DISPLAY;
 
file of the tracer type
 
Type of Input
:
Single value, mandatory
 
Possible Values
:
*
last file is opened
 
 
 
FILE
user defined file name
 
 
 
OFF
block or deactivate or delete trace-criteria
 
 
 
STDTR
standard tracer buffer
 
 
 
 
 
FLDTYPE
Used in command: SELMSG;
 
branch parameter, specifies the field in the trace
 
object on the basis of which selection is to be made.
 
Type of Input
:
Single value, mandatory
 
Possible Values
:
BY
next defined byte
 
 
 
DEST
destination task
 
 
 
EV
event code
 
 
 
PST
powerset resp. mask comparison
 
 
 
SRC
source task
 
 
 
SEVT
subevent code
 
 
 
SU
subunit
 
 
 
 
 
INFO
Used in command: STA;
 
indicates how much information is output
 
Type of Input
:
Single value, optional
 
Possible Values
:
S
short
 
 
 
L
long
 
 
 
M
medium
 
 
 
C
selection conditions
 
 
 
STDTR
long information of StandardTracer
 
Default Value
:
S
 
 
 
 
 
 
LEN
Used in commands: DA, DB, DF, DL, DN, DA-T, DB-T, DF-T, DL-T, DN-T, MSGLEN;
 
Commands DA, DB, DF, DL, DN, DA-T, DB-T, DF-T, DL-T, DN-T:
 
maximum output length of a trace object in bytes
 
Command MSGLEN:
 
maximum entry length for a message.
 
The supplementary data, e.g. SDNO, etc., is not included.
 
Type of Input
:
Single value, optional
 
Possible Values
:
0 - 65535
 
 
 
(may be reduced by the AMO to the maximum value implemented)
 
Default Values
:
Commands DA, DB, DF, DL, DN, DA-T, DB-T, DF-T, DL-T, DN-T:
 
 
 
None (full object length is default value)
 
 
 
Command MSGLEN: 16
 
 
 
 
 
LOCK
Used in command: SELMSG;
 
Specifies the lock of dynamic manipulations of conditions
 
Type of Input
:
Single value, optional
 
Possible Values
:
BLOCK
blocking execution of conditional conditions
 
 
 
UNBLO
unblocking execution of conditional conditions
 
 
 
 
 
MAXBLOCK
Used in command: ON;
 
Specifies the filesize in multiple of trace buffer.
 
Type of Input
:
Single value, optional
 
Possible Values
:
1 - 99
 
Default Value
:
10
 
 
 
 
 
MAXNO
Used in command: MAXNO;
 
specifies the maximum number of trace objects to be written into the buffer.
 
Type of Input
:
Single value, optional
 
Possible Values
:
0 to 65535
 
Default Value
:
0 (= unlimited)
 
 
 
 
 
NO
Used in command: DN, DN-T;
 
the objects in the trace buffer are consecutively numbered from 1 to 65535 (0 is 65536).
 
This consecutive number can be used to specifically address each trace object.
 
Type of Input
:
Single value, linked Single values mandatory
 
Possible Values::
0 - 65535
 
 
 
 
 
 
NUMCD
Used in command: SELMSG;
 
Specifies the NUMber of ConDitions which are dynamic to change.
 
Type of Input
:
Single value, optional
 
Possible Values
:
1 - 8
 
Default Value
:
1
 
 
 
 
 
OVERWRT
Used in command: ON;
 
Specifies whether a file is overwritten or not
 
Type of Input
 
Single value, optional
 
Possible Values
 
Y
File will be overwritten
 
 
 
N
File will be not overwritten
 
 
 
 
 
POOLSIZE
Used in command: ON
specifies the number of trace buffers in the trace buffer pool
 
Type of Input
:
Single value, optional
 
Possible Value
:
0 (no trace buffer pool)
 
 
 
7 - 99
 
 
Default Value
:
20
 
 
 
 
 
 
RESOBJ
Used in command: RES;
 
parts of the tracer that are reset.
 
Type of Input
:
Single value, optional
 
Possible Values
:
BUF
Trace buffer, i.e. the buffer contents are deleted.
 
 
 
TBL
All selection tables, i.e. no message is selected, no
 
 
 
 
dynamic memory is selected, no control condition is
 
 
 
 
set. All the length fields are set to 16 bytes.
 
 
 
 
(The condition bits for post-selection remain
 
 
 
 
unchanged).
 
 
 
ALL
The trace buffer and all selection tables are reset.
 
Default Value
:
BUF
 
 
 
 
 
 
STYPE
Used in commands: ON, RST, SELMSG, SELSTOP;
 
specifies how the criterion for restart stability (RST)
 
and/or the serialization mechanism is to be set (SELSTOP)
 
and/or what action is to execute (SELMSG)
 
and/or if the trace result is also to store on harddisk (ON)
 
Type of Input
:
Single value, optional in ON
Single value, mandatory in RST, SELMSG, SELSTOP
 
Possible Values
:
For ON:
 
 
 
 
BUF
Tracing only in trace buffer (Default Value)
 
 
 
HD
the full trace buffer is to store in a file on HD
 
 
 
For RST:
 
 
 
OFF
Tracer is not to have restart stability
 
 
 
ON
Tracer is to have restart stability
 
 
 
For SELMSG:
 
 
 
 
ADD
adding of a selection value
 
 
 
DEL
deleting of selection values of a condition
 
 
 
SET
setting of a selection value
 
 
 
SUB
deleting of a selection value
 
 
 
For SELSTOP:
 
 
 
 
OS
Serialization with OS resources
 
 
 
LOCK
Serialization with interrupt disable
 
 
 
 
 
TARGETCD
Used in commands: SELMSG;
 
indicates whether dynamic condition is to be set
 
Type of Input
:
Single value, optional
 
Possible Values
:
CD1
first condition
 
 
 
CD2
second condition
 
 
 
CD3
third condition
 
 
 
CD4
fourth condition
 
 
 
CD5
fifth condition
 
 
 
CD6
sixth condition
 
 
 
CD7
seventh condition
 
 
 
CD8
eighth condition
 
Default Value
:
Value of the parameter COND
 
 
 
 
 
TARGETGRP
Used in commands: SELMSG;
 
indicates for what group a dynamic condition is to be set
 
Type of Input
:
Single value, optional
 
Possible Values
:
G1
condition group 1
 
 
 
G2
condition group 2
 
 
 
G3
condition group 3
 
 
 
G4
condition group 4
 
Default Value
:
Value of the parameter CONDGRP
 
 
 
 
 
TARGETPO
Used in commands: SELMSG;
 
indicates the byte position in the target message (for setting conditional conditions)
 
Type of Input
:
Single value, mandatory
 
Possible Values
:
0 - 12000
 
 
 
 
 
 
TARGETTP
Used in commands: SELMSG;
 
indicates the target trace point for conditionals conditions
 
Type of Input
:
Single value, optional
 
Possible Values
:
LAN
LAN data
 
 
 
PT
stop condition for periphal lw tracer
 
 
 
RCV
tracepoint in OS_RECEIVE_message
 
 
 
SD
tracepoint in OS_SEND_ message
 
 
 
START
start condition for tracer
 
 
 
STOP
stop condition for tracer
 
 
 
STOPALL
stop condition for all tracer in system
 
 
 
TIME
time condition for tracer
 
Default Value
:
Value of the parameter TRACEPT
 
 
 
 
 
TEST
Used in commands: DA, DB, DF, DL, DN, DA-T, DB-T, DF-T, DL-T, DN-T, SELMSG;
 
indicates how the value is to be tested in pre- or post-selection (comparison TEST).
 
Type of Input
:
Single value, optional
 
Possible Values
:
Commands DA, DB, DF, DL, DN, DA-T, DB-T, DF-T, DL-T, DN-T:
 
 
 
E
equality
 
 
 
NE
inequality
 
 
 
SELMSG in accordance with the set condition bits
 
 
 
(For SELMSG,BUF,..?)
 
 
 
Command SELMSG:
 
 
 
E
equality
 
 
 
NE
inequality
 
Default Value
:
E
 
 
 
 
 
 
TEXT
Used in commands: USER;
 
contains infotext assigned to other users of the tracer and/or a name of own switch for in the net stopped partner switch
 
Type of Input
:
Single value, optional
 
Possible Values
:
Text, max 70 chars
 
 
 
 
 
TRACEPT
Used in commands: SELMSG, MSGLEN;
 
specifies the trace point or the control condition
 
at which a select criterion is to be set for messages.
 
Type of Input
:
Single value, mandatory
 
Possible Values
:
BUF
Buffer; setting of condition bits for post-selection (only SELMSG)
 
 
 
LAN
LAN trace point
 
 
 
OS
SD and RCV
 
 
 
RCV
RECEIVE_MESSAGE in OS
 
 
 
SD
SEND_MESSAGE in OS
 
 
 
START
Start condition
 
 
 
STOP
Stop condition
 
 
 
STOPALL
Stopall condition
 
 
 
TIME
Time condition
 
 
 
 
 
TYPE
Used in commands: DA, DB, DF, DL, DN, DA-T, DB-T, DF-T, DL-T, DN-T, SETLAN;
 
For DA, DB, DF, DL, DN, DA-T, DB-T, DF-T, DL-T, DN-T:
 
specifies which type of trace objects is to be output
 
For SETLAN:
 
specifies which type of LAN objects is to be traced
 
Type of Input
:
Single value, for SETLAN mandatory, else optional
 
Possible Values
:
For SETLAN:
 
 
 
 
ETHRV
Ethernet driver: protocol headers of incoming frames
 
 
 
ETHSD
Ethernet driver: protocol headers of outgoing frames
 
 
 
IPDSD
IP data: dual-port-ram send
 
 
 
IPDRV
IP data: dual-port-ram receive
 
 
 
TCP
TCP data (Transmission Control Protocol)
 
 
 
TPI
TPI data
 
 
 
For DA, DB, DF, DL, DN, DA-T, DB-T, DF-T, DL-T, DN-T:
 
 
 
ALL
all objects
 
 
 
ETHRV
Ethernet driver: protocol headers of incoming frames
 
 
 
ETHSD
Ethernet driver: protocol headers of outgoing frames
 
 
 
LAN
all LAN objects: ETHRV, ETHSD, TCP, TPI, IPDSD, IPDRV
 
 
 
OS
SD and RCV
 
 
 
RCV
all messages from trace point RCV
 
 
 
SD
all messages from trace point SD
 
 
 
TCP
TCP data (Transmission Control Protocol)
 
 
 
TPI
TPI data
 
Default Value
:
OS
 
 
 
 
 
 
UNIT
Used in command P
 
Processor to which the AMO is connected
 
Type of Input
:
Single value, optional
 
Possible Values
:
A1
ADS
 
Default Value
:
A1
 
 
 
 
 
 
VAL
Used in commands: DA, DB, DF, DL, DN, DA-T, DB-T, DF-T, DL-T, DN-T, SELMSG;
 
Values with which the specified field is compared for selection.
 
Several signal values must be viewed as logically OR
 
Type of Input
:
Single value,
 
 
 
linked Single values and/or range entries
 
 
 
mandatory in SELMSG
 
 
 
optional in DA, DB, DF, DL, DN, DA-T, DB-T, DF-T, DL-T, DN-T
 
Possible Values
:
hex values 00 - FF.
 
 
 
 
 
WRAP
Used in commands: ON;
 
indicates whether the trace file is to be wrap around
 
Type of Input
:
Single value, optional
 
Possible Values
:
Y
wrap around the file
 
 
 
N
if file is full trace data are written only in the TB
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620
 © 09/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.