197.3.2
DEACTIVATE-TREF
When deactivating T-Reference point, all attenuation values set on LTUCE/SCC will be reset to 0dB. If T-Reference point was already deactivated, the error message F05 will be displayed.
Procedure Overview
Command Code
Parameter
DEACTIVATE-TREF
;
Example
1.
Deactivate T-Reference point matrix
Input:
DEACT-TREF;
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5
, ID:
P31003H31A0S107057620
©
09/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.