202.2.2 CHANGE-UCSU

Modify by means of the action CHANGE:
•
type of LTUC module and some other parameters of LTU
•
IP address and some other parameters of AP shelves
•
PARTNO of central SIU
•
part number of the MTS/CONF-Module in cabinet configurations and compact systems (H600C)
•
configure an overlay-LTU for an existing standard-LTU
Hints/Restrictions:
•
An overlay configuration is only possible, if the HW platform is a H600ECX/ECS/cPCI or a H80CXE.
•
Furthermore, when the LTU was configured, the LTUCX-board (Q2166-X) must have been configured.
•
For cPCI platform the LTUCA board (Q2266-X) must be configured, respectively the overlay configuration is not permitted within a 19“ shelf.
•
When an overlay LTU is configured for a standard LTU and no value was entered for parameter OVERLAY, the number of the overlay LTU will be determined automatically by the AMO whereby the highest allowed free LTU number will be used. Following overlay LTU numbers, depending on the HiPath4000 type and configured SIU board are possible:
H80CXE:
–
LTU 7 - LTU 2
H600ECX/ECS:
–
Configured SIU board = Q2234-X: LTU 15 - LTU 1
–
Configured SIU board = Q2234-X100: LTU 7 - LTU 1
H600EcPCI:
–
Configured RTM board = Q2266-X: LTU 15 - LTU 1
The following LTUC/NCUI boards can be modified:
 
LTUC-old
direction
LTUC-new
Q2148-X
--->
Q2248-X
Q2248-X
<--->
Q2166-X
Q2248-X
<--->
Q2189-X?00
Q2166-X
<--->
Q2189-X?00
Q23??-X
<--->
Q23??-X10
•
Parameter LTPARTNO:
Concerns to new LTUC/NCUI board.
•
Parameters CONNTYPE, LOCATION, PHONE and FAX:
See description of this parameters under action ADD.
Procedure Overview
 
Command Code
Parameter
CHANGE-UCSU
UNIT=LTU,[LTG=<number>],LTU=<number>,
 
[LTPARNO=<string>], FRMTYPE=<param>,
 
[CONNTYPE=<param>],
 
[LOCID=<number>], [LOCATION=<string>],
 
[PHONE=<key-number>], [FAX=<key-number>],
 
[ALARMNO=<nummer>];
 
 
 
|UNIT=AP,[LTG=<number>],LTU=<number>,
 
[LTPARNO=<string>], [SRCGRP=<number>],
 
[LSRTADDR=<number>], [APRTADDR=<number>],
 
[LOCID=<number>], [LOCATION=<string>],
 
[PHONE=<key-number>], [FAX=<key-number>],
 
[PLCHECK=<param>], [BCHLCNT=<number>],
 
[CONVLAW=<param>], [TCLASS=<nummer>],
 
[ALARMNO=<nummer>],[SOCOTYPE=<param>],
 
[SIUANN=<string>],[SIUC=<string>],
 
[DTR=<string>],[CP=<param>],
 
[SIU=<number>],[CNTRYCD=<string>],
 
[SIGMODE=<param>],[TEXTSEL=<param>],
 
[LANGID=<param>];
 
 
 
|UNIT=ENTGW,[LTG=<number>],LTU=<number>;
 
[SRCGRP=<number>],[FRMTYPE=<param>];
 
[CONNTYPE=<param>], [LSRTADDR=<number>];
 
[APRTADDR=<number>], [LOCID=<number>];
 
[LOCATION=<string>], [PHONE=<key-num>];
 
[PLCHECK=<param>], [BCHLCNT=<number>],
 
[CONVLAW=<param>], [TCLASS=<nummer>],
 
[ALARMNO=<nummer>],[SOCOTYPE=<param>],
 
[SIUANN=<string>],[SIUC=<string>],
 
[DTR=<string>],[CP=<param>],
 
[SIU=<number>],[CNTRYCD=<string>],
 
[SIGMODE=<param>],[TEXTSEL=<param>],
 
[LANGID=<param>];
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620
 © 09/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.