203.4 Parameter Description


STATE	State of the automatic update
	Type of Input	:	Single value, optional
	Possible Values	:	OFF	= deactivated
			ON	= activated

SUSY	DB subsystems to be updated
	Type of Input	:	Single value, optional
	Possible Values	:	ALL	= all
			DELTA	= where data has been changed
	Default Value	:	DELTA

UNIT	Mnemonic code of server in which the AMO is to be executed
	Type of Input	:	Single value, mandatory
	Possible Values	:	BP	= active base processor (A or B) of SWU
			BPS	= standby base processor (A or B) of SWU
			BPA	= base processor A of SWU
			BPB	= base processor B of SWU
			A1	= administration and data server (ADS)
			C1	= call charge server (CM)
			V1-V3	= voice mail server (VMS)
			T1-T3	= telecommunication server (TCS)

UPDT01	Time when updating is to start
to	Type of Input	:	Single value, optional
UPDT12	Possible Values	:	H-Mi
			H	= hour
			Mi	= minute

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.