205.2.3.3 UPDATAP

This branch is used to update particular connection or board data of an NCUI board (e.g. IP routing tables). In order to send "update connection" message to FA, there are some prerequisite status checks; e.g.

-LTU status must be "READY ",

and no background loading is active for the concerned AP Shelf

Above constraints may issue the error messages F37, F36 and F35 respectively.

For parameter LOADTYPE=UL the parameter ANSW is prompted in any case (even if the parameter has already been specified by the user). For ANSW=YES the loading process is initiated even if all LW data on board and DB are equal. This function should only be used in case of changing the NCUI board - more details can be seen in the feature usage examples for IPDA.

If LOADTYPE is not specified or CL the parameter ANSW will be ignored in any case and additionally the loading process will only be initialized if there exist changed LW data.

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.