206.3.3
DEACTIVATE-VADSM
DEACTIVATE-VADSM can be used to deactivate an active alarm.
This is possible also for alarms whose threshold values cannot be changed (see Table 1). When its threshold values can be changed, an alarm can also be deactivated using ’CHANGE-VADSM’.
Procedure Overview
Command Code
Parameter
DEACTIVATE-VADSM
[UNIT=<param>],
ALARMGR=CENTRAL,ALARMNO=<range>;
|
ALARMGR=PERIPHER,ALARMNO=<range>;
Example
Deactivate central alarm 13 in the ISp.
Input:
DEACTIVATE-VADSM:UNIT=A1,ALARMGR=CENTRAL, ALARMNR=13;
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5
, ID:
P31003H31A0S107057620
©
09/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.