206.3.5 REGENERATE-VADSM

All alarms (already ADDED) are regenerated by means of CHANGE commands. Only those alarms are regenerated whose validation data (THRESHD1, THRESHD2, TIME1, TIME2, TIME) deviates from the basic initialization data, i.e. those which have been changed using the AMO VADSM. In the same way, only the validation values which deviate from the initialization data will be regenerated.

Procedure Overview


Command Code	Parameter
REGENERATE-VADSM	[UNIT=<param>],
	[ALARMGR=CENTRAL],[ALARMNO=<range>];

	\|[ALARMGR=PERIPHER],[ALARMNO=<range>];

Example

Regenerate central SM alarm 9 in the ISp.

Input:

REG-VADSM:A1,CENTRAL,9;

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.