207.5.2 CHANGE-VADSU

Changing the validation data of central, peripheral or logical alarms.
CHANGE-VADSU can be used to change threshold values and validation times. With directional or personal alarms, it can also be used to change the alarm name.
The threshold values of some central SWU alarms cannot be changed (see Table 1).

Procedure Overview


Command Code	Parameter
CHANGE-VADSU
	ALARMGR=CENTRAL,ALARMNO=<number>
	,{THRESHD1=<number>,THRESHD2=<number>
	,TIME1=<number>,TIME2=<number>,TIME=<number>
	,PRIO=<number>,HWCONT=<param>};

	\|ALARMGR=PERIPHER,ALARMNO=<number>
	,{THRESHD1=<number>,THRESHD2=<number>
	,TIME1=<number>,TIME2=<number>,TIME=<number>
	,PRIO=<number>,HWCONT=<param>};

	\|ALARMGR=LOGICAL,ALARMNO=<number>
	,{THRESHD1=<number>,THRESHD2=<number>
	,TIME1=<number>,TIME2=<number>,TIME=<number>
	,PRIO=<number>,HWCONT=<param>,NAME=<string>};

Example

Change the threshold value for the major alarm of central alarm 5.

Input:

CHANGE-VADSU:ALARMGR=CENTRAL,ALARMNO=5,THRESHD2=4;

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.