207.5.3 ACTIVATE-VADSU

Activate a not active alarm. When threshold values can be changed, activation of an alarm is also possible using ’CHANGE-VADSU’.

Procedure Overview


Command Code	Parameter
ACTIVATE-VADSU	[ALARMGR=CENTRAL,ALARMNO=<range>;

	\|ALARMGR=PERIPHER,ALARMNO=<range>;

	\|ALARMGR=LOGICAL,ALARMNO=<range>; \|ALARMGR=SNAPSHOT;

Examples

Activate a central alarm:

Input:

ACT-VADSU:CENTRAL,5;

Output:

H500: AMO VADSU STARTED
H09: MINOR ALARM 5 HAS BEEN ACTIVATED.
H10: MAJOR ALARM 5 HAS BEEN ACTIVATED.
AMO-VADSU-69 NMC ALARMS CONFIGURATION, SWITCHING UNIT
ACTIVATE COMPLETED;

Activate the SNAPSHOT function

Input:

ACT-VADSU:SNAPSHOT;

Output:

H500: AMO VADSU STARTED
AMO-VADSU-69 NMC ALARMS CONFIGURATION, SWITCHING UNIT
ACTIVATE COMPLETED;

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.