210 VBZGR - Internal Traffic Restriction Groups


Interrelationships	Parameter Descriptions
Functions of the AMO	Error Messages and Advisories

AMO VBZGR (internal traffic restriction groups) allocates the corresponding destinations for hotline ( application) to the internal traffic restriction groups.


Hotline	=	Immediate call setup.

By means of this AMO, code calling system, customer names for call forwarding, listener, zone allocation for call detail recording for both internal and incoming connections and display suppression of the call forwarding destination can be entered.

Code calling (CC) system code /Paging system (PS) code

This code is sent after the search access code is dialed (or after the CC/PS function key is pressed, if programmed) on a terminal.

Customer Name

The customer name is displayed on the attendant console in cases of call forwarding. If dialing is complete, the ITR group of the destination is used; if dialing is not completed, the ITR group of the trunk seized incoming

Application Number

Devices with ID card readers can be allocated a specific application, such as door opener or gas/petrol pump. The applications are identified with numbers that are allocated to the ITR groups.

In addition, the corresponding device must include the authorization "application hotline" in its COS (class of service). If a "neutral" ID card is inserted into a device thus identified, the application allocated to its ITR group is carried out. be initialized, that means that the first entry will be assigned to all groups. Every consecutive entry will be made in the groups specified in the AMO-call.

Listener

For each ITR-group one dial number for a listener can be assigned. This number must lead to a DAR STN in the digit analysis. The listener can be an internal number, then the number must be assigned; in case the listener is an external number, this number must be relocated to a route number.

Zone-allocation for call detail recording

For each ITR-group one zone can be assigned. The zone must be parameterized in CDR.

Display-suppression of the call forwarding destination

For each ITR-group the displayed call forwarding destination can be suppressed.

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.