213.2.3
DELETE-VFGR
The following points must first be observed:
•
the attendant group dialing code allocated to the ATNDGR with the aid of AMO
VFGKZ
must be deleted.
•
existing allocations of ITRGRs to ATNDGRs must be deleted (see example).
•
the call queuer of the ATNDGR is also deleted with this function. If the call queuer is not empty, then DELETE-VFGR is rejected.
•
the ATNDGR may not be assigned as internal centralized ATND service in another ATDGR.
Procedure Overview
Command Code
Parameter
DELETE-VFGR
ATNDGR=<number>;
Example
Delete ATNDGR 1 with the ITR groups 3 and 5 for attendant intercept.
1.
Re-allocate assignments to ATNDGR 0.
Input:
CHANGE-VFGR:ATNDGR=0,TYPE=GENERAL,ITDEST=3&5;
2.
Delete ATNDGR1.
Input:
DELETE-VFGR:1;
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5
, ID:
P31003H31A0S107057620
©
09/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.