214.4.3
ACTIVATE-VOICO
This command is used to activate the configured VC connections.
Mind following steps:
–
Both circuits (VCM and partner board) have to be deactivated.
–
The VC connection of the specified VCSU has to be configuried.
–
The VC connection VCSU1 has to be activated first.
Procedure Overview
Command Code
Parameter
ACTIVATE-VOICO
PEN1=<pen>,[VCSU=<number>];
Examples
1.
Activate a VC connection with VCSU1 for VCM pen: 1-1-49-0.
Input:
ACT-VOICO:1-1-49-0,1;
2.
Activate all configured VC connections for VCM pen 1-1-49-0 .
Input:
ACT-VOICO:1-1-49-0;
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5
, ID:
P31003H31A0S107057620
©
09/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.