214.6.2 Advisories


H01:	VCSU <number> IS ALREADY ACTIVATED
	The entered VC connection (VCSU) is already activated and can only be deactivated.
H02:	VCSU <number> IS ALREADY DEACTIVATED
	The entered VC connection (VCSU) is already deactivated and can be deleted or activated.
H03:	VCSU <number> HAS BEEN ACTIVATED
	The entered VC connection(s) is/are active.
H04:	VCSU <number> HAS BEEN DEACTIVATED
	The entered VC connection(s) is/are deactive.
H05:	NO VCSU CONFIGURED
	By interrogating all VC connections no configured VC connection was found.
H06:	FOR SPECIFIED PEN NO VCSU CONFIGURED
	For entered pen no configured VC connection was found (Display VCM, PEN or Display PARTNER, PEN).
H07:	ATTENTION - THE CONFIGURATION OF VOICO HAS TO BE SYMMETRICAL!
	BEFORE REACTIVATING THE S0/S2 CONNECTION BE CAREFUL TO SWITCH
	THE SAME VCSU’S AT YOUR PARTNER PBX!

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.