17.29. LINC - Handling implicit numbers when connecting to a
carrier 
Feature:
Display modification
LINC enables the handling of E164 numbers between OpenScape 4000 carrier and customer
systems without KNMAT entries.
Function:
The LINC parameter identifies OpenScape 4000 carrier systems of customer systems by
means
of which only implicit numbers without breakout code (e.g. 089 722-4711 or just 4711)
as
sent as calling numbers.
IMPORTANT:
The "Calling Number" refers to every number that is not the "Called
Number" (e.g. the number of subscriber A, the number of the answering subscriber,
the number
of the diverting subscriber, etc.).
On the incoming side all numbers are transformed by the LINC COT into an implicit
format of
ISDN numbering plan E164 with NPI=ISDN and TON=UNKNOWN. KNFOR entries on the customer
system
are ignored.
On the outgoing side, the calling number is transformed to the format set in KNFOR
(node
format table) and expanded with the prefixes from the KNDEF (e.g. 89 722-4711 -> e.g.
089
722-4711).
In the trunk to the customer the ISDN prefixes must be entered with the AMO TDCSU
of the
relevant customer and the ISDN codes must be entered in the AMO KNDEF!
IMPORTANT:
A customer system may not send a calling number as the subscriber
number (e.g. 722-4711) if the COT parameter LINC is set because this number cannot
be
distinguished from an extension number, e.g. 7221. Permitted for the calling number:
- 0049
89 722 4711 - 089 722 4711 - 4711
AMO Interrelationships:
|
AMO TDCSU:
|
Set up prefixes for NPI=ISDN with the parameters
ISDNIP and ISDNNP
|
|
AMO KNPRE:
|
Set the node prefix table with the parameters
BREAKOUT, PREFIX, etc.
|
|
AMO KNFOR:
|
Set up a node format table with the parameters
DNNO= ... , NPI=ISDN, TON=...
|
|
AMO KNDEF:
|
Set up a node number table with the parameters
DNNO= ... , ISDNCC, ISDNAC, ISDNLC, etc.
|
IMPORTANT:
LINC and LIRO may not be set at the same time.
IMPORTANT:
LINC and LIRO may not be set at the same time.
Device types:
Digital tie trunk circuits
Network protocols:
For example, ECMAV2 (CorNet-NQ Issue 2.1 Dec.96 Basic ETSI), PSS1V2 (CorNet-NQ Issue
2.1
Dec.96 Basic ISO/IEC)