11.1.8.3. Generation (Example) 
Intercept of incoming external calls (CO-trunk) in case of "non existent"
achieved through a dedicated ATNDGR with night option to a analogue announcement
device. Used to alleviate traffic to the operator. (see below the primary
commands which are necessary to be configured)
/* Allow feature intercept */ CHANGE-FEASU:TYPE=A,CM=ICPTDID; /* Cot with IVAC */ ADD-COT:COTNO=100,PAR=IVAC, INFO="INTERCEPT"; /* Trunks, with ITR 15 */ CHANGE-TDCSU:PEN=<LTG-LTU-EBT-PORT>, COTNO=100,ITR=15; /* SLMA1 for announcement */ ADD-BCSU:MTYPE=PER,LTU=1,SLOT=55, PARTNO=Q2141-X; /* Configure station for announcement */ ADD-SCSU:STNO=2100,PEN=1-1-55-0,DVCFIG=ANATE, DPLN=1,ITR=0,COS1=380,COS2=380,LCOSV1=8, LCOSV2=7,LCOSD1=1,LCOSD2=1; SOND=SOTL&NAWA,WAHL=MFV,DHPAR=MFVTLN, INBETR=JA,GETLNNU=NEIN; /* Station as night option (e.g.. No. 128) */ ADD-NAVAR:NOPTNO=128,TYPE=STN,STNO=2100; /* Install ATNDGR with night option for intercept ITR (15) of trunks */ ADD-VFGR:ATNDGR=2,NOPT1=128,OPT=1,CQMAXF=3, ITDEST=15; /* Activate call queues */ ADD-VFGKZ:TYPE=ATNDGR,CD=98,ATNDGR=2; ADD-VFGKZ:TYPE=ATNDGR,CD=99,ATNDGR=2; /* Activate night option for ATNDGR */ ADD-ACTDA:TYPE=ATNDGR,ATNDGR=2,NOPT=1, ACT=ACT; /* Setup Interalia MMU2-62AB */
Operating Typ: Ring Start with Loop Current Check . Dipfix-Switch:
- S1 = on \
- S2 = on > Message 1 on all lines
- S3 = on /
- S4 = off \
- S5 = on \
- S6 = off > Ring Start Mode on all lines
- S7 = on /
- S8 = on > separate ansage