Collapse AllExpand All

11.4.1. CC in DISPLAY OPERATION Previous topic Parent topic Child topic Next topic

  • Add the paging codes in the DPLN 
    AD-WABE:CD=key-num,DAR=CCSN;
  • Configure the TMOM module 
    AD-BCSU:MTYPE=PER,LTU=number,SLOT=number,
PARTNO=string;
  • Add trunk group 
    AD-BUEND:NO=number;
  • Add class of trunk 
    AD-COT:PAR=NTON;
  • Assign a class of parameter 
    AD-COP:PAR=DTMF&SACK&LSUP&PDP2&IDP1&DTM1;
    Parameter CCR depends on the type of code calling system! Value EOD can only be assigned with ESPA interface!
  • Add a line circuit 
    AD-TSCSU:COTNO=number,TGRP=number,DEV=CC,
COPNO=number, *)
    *) for AMO TSCSU, the parameters must be declared as follows:
    WIRES
    =
    depending on the system, 2, 3 or 4 wires
    SUPV
    =
    SUPV1
    ACKT
    =
    SZACK2
    STADIAL
    =
    STADIAL1
    ABLK
    =
    Y (paging party's station number is transmitted)
    STNOLEN
    =
    0 (station number = paging number)
    Assign a route for the code calling system
    AD-RICHT:TYPE=CD,CD=key-num,CPS=1&2&3&4&5&6&7&8&9,
SVC=VCE,TGRP1=number;
    IMPORTANT:
    CPS 6 (incoming CO trunk) is not assigned as paging via the public network is not provided. The CPSs 10&11&12 are only required for inter-PABX traffic.
${DocTitle}, ID: ${DocID}
© 03/2026 Mitel Networks Corporation. All rights reserved. Mitel and the Mitel logo are trademark(s) of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH & Co. KG. All other trademarks herein are the property of their respective owners.