- Assign codes for normal code calling, urgent code calling and answering
in the DPLN
AD-WABE:CD=key-num,DAR=CCMS;
AD-WABE:CD=key-num,DAR=CCMSURG;
AD-WABE:CD=key-num,DAR=CCMANS;
- Add configuration data for the TMOM module
AD-BCSU:MTYPE=PER,LTU=number,SLOT=number,
PARTNO=string;
- Assign a trunk group
AD-BUEND:NO=number;
- The COT and COP parameters are entered as for DISPLAY operation, except
that the COP parameter CCM for Meet-Me operation must also be specified.
- The trunk circuit is assigned as for DISPLAY OPERATION except:
SRCHATT = 5, default value (max. 99 possible) and OPTYPE=Meet-Me instead
of DISPLAY.
- Configure the circuit with the TSCSU AMO as for DISPLAY operation. The
only parameters which are different are SRCHATT=5 (standard value, max.
99 possible) and OPTYPE=MEETME.
For CCM in Meet-Me operation, the TSCSU parameter MABLK must be set
to '0', i.e. calling party's number is not displayed
(see also CCM in Meet-Me operation with Display).
- Assign route to multiple code calling system
AD-RICHT:TYPE=CD,CD=key-num,RTECD=key-num,
SVC=VCE,TGRP1=number;
