11.6.4. Reversing the Number Display Sequence 
For CCM in DISPLAY operation, you can reverse the display sequence
of the number blocks on the CCM receiver devices by setting the ZAND
parameter AAFTERB. This means that the A-block will be displayed after
the B-block, i.e. the display sequence will be "answering number - calling
party's number - answering code" (B-block/A-block/C-block).
- Set new display sequence "answering number - calling party's number
- answering code"
CHA-ZAND:TYPE=CCM,AAFTERB;
Default Value: AAFTERB i s n o t set (i.e. standard sequence A-block/B-block/C-block, i.e. "calling party's number - answering number - answering code")An answering code will only be displayed if assigned with the TSCSU AMO.