Collapse AllExpand All

6.1.6.1.1. Voice Previous topic Parent topic Child topic Next topic

Connections to special equipment (such as dictation equipment, paging equipment, etc.) are also recorded. Feature activations are not recorded if no voice transfer results (such as call waiting).
Connections with the attendant console (ATND) are only registered if the ATND is on the called side.

Figure 80. Configuration for internal traffic

bc00c80b.wmf.png

Configuring system features

AMO FEASU
  • CDRINH
Record call charges for internal traffic.
  • DISCHINH
Display call charges for internal traffic on the station display
  • CDRA
Call detail recording at station (ATND)

Configure station-specific features

AMO COSSU
  • CDPRINT
Recording for the station with the COS no. ...
  • CDRSTN
Immediate display of call charges on the terminal device
  • CDRA
Call detail recording at attendant (ATND)

Configuring zone values

AMO VBZGR
  • TYPE
Branch parameter for call detail recording for incoming calls (CHRGINT)
  • ZONE
Zone allocation for call detail recording for internal calls (INT01-INT09)

Configure tariff tables

AMO TTBL
  • Configure tariff group table 
    TAB=GRP: GROUPNO, CARRIER (=0), CATPTY, SERVICE, TARTBLNO
  • Configure tariff table without call charge information 
    TAB=WOCU: TARTBLNO, ZONE (=INT01-INT09), INTDAY, TARDAY, 
INTNT1-INTNT4, NTAR1-NTAR4, TARBAS, TARMIN, SEGTBLNO, CHPER

Configure timers

AMO CTIME
  • DISPCH
Update period of the station call charge display, in seconds
  • CDRDISDE
Duration of the call charge display after end of call (in seconds)
${DocTitle}, ID: ${DocID}
© 03/2026 Mitel Networks Corporation. All rights reserved. Mitel and the Mitel logo are trademark(s) of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH & Co. KG. All other trademarks herein are the property of their respective owners.