Section 7.5.1. Immediate Output to GC 3001 A

7.5.1. Immediate Output to GC 3001 A

Enter line allocation for connecting GC 3001A to line 17

AD-ATCSM:UNIT=A1,TYPE=CFIG,CFIG=DEV,TYPENO=8,
TERMDESC=ARCVCO,CNTRLNA=F8,T=30,ANSLNT=04,ANSLN=00,
CNTRLND=02; 

AD-LCSM:UNIT=A1,MLNTYPE=ASYNC,TYPENO=8,BAUD=2400,
LEN=7,STOPLEN=SL2_,TRNSCLK=INT,RCLK=INT; 

AD-ATCSM:UNIT=A1,TYPE=ADD,ALSEL=LN,TYPENO=8,LN=17; 

AC-BSSM:UNIT=A1,TYPE=BC,SLOT=13,KIND=ANT; 

AC-LSSM:UNIT=A1,LN=17;

Configure CDR with immediate output to options
```
AD-FEACG:CM=CDRCDUMP;
```
Add CDR code to route code table
```
AD-RCUT:RTECD=0,CDRCODE=0; 
```

Add device allocation

AD-GEZU:TBL=TTY,NAMEOUT=DEV2,PHDEV=TTY,
DEVCL=GC3001A;

Create GC3001A format

AD-FTBL:FORMNO=3,TYPE=B,TBL=FORM,NO=1,END=N,
FORMAT=""*#@@+#@@@@+#+#@@+#@@@@@@@@@@@@@+0+
#@@@@@@@@@@@+#@#@#@+#@#@#@#@+""; 

AD-FTBL:FORMNO=3,TYPE=B,TBL=CTRL,NO=2,END=N,
CTLCHARS=CR; 

AD-FTBL:FORMNO=3,TYPE=B,TBL=CTRL,NO=3,END=Y,
CTLCHARS=LF; 

AD-FTBL:FORMNO=3,TYPE=B,TBL=FIELD,NOFELD=1,
FLDNAME=TKNOREAL,FATTR=NONE,DATTR=NONE,
FILLTYPE=CHAR,FILLER=0,FLDALIGN=R; 

AD-FTBL:FORMNO=3,TYPE=B,TBL=FIELD,NOFELD=2,
FLDNAME=CHRGEE,FATTR=NONE, DATTR=NONE,
FILLTYPE=CHAR,FILLER=0,FLDALIGN=R; 

AD-FTBL:FORMNO=3,TYPE=B,TBL=FIELD,NOFELD=3,
FLDNAME=RECPT,FATTR=NONE,DATTR=NONE,FILLTYPE=CHAR,
FILLER=0,FLDALIGN=R; 

AD-FTBL:FORMNO=3,TYPE=B,TBL=FIELD,NOFELD=4,
FLDNAME=CHRGUNIT,FATTR=NONE,DATTR=NONE,FILLTYPE=CHAR,
FILLER=0,FLDALIGN=R; 

AD-FTBL:FORMNO=3,TYPE=B,TBL=FIELD,NOFELD=5,
FLDNAME=VDESTNO,FATTR=NONE,DATTR=NONE,FILLTYPE=CHAR,
FILLER= ,FLDALIGN=L; 

AD-FTBL:FORMNO=3,TYPE=B,TBL=FIELD,NOFELD=6,
FLDNAME=PIN,FATTR=NONE,DATTR=NONE,FILLTYPE=CHAR,
FILLER= ,FLDALIGN=L; 

AD-FTBL:FORMNO=3,TYPE=B,TBL=FIELD,NOFELD=7,
FLDNAME=CONHOUR,FATTR=NONE,DATTR=NONE,FILLTYPE=CHAR,
FILLER=0,FLDALIGN=R; 

AD-FTBL:FORMNO=3,TYPE=B,TBL=FIELD,NOFELD=8,
FLDNAME=CONMIN,FATTR=NONE, DATTR=NONE,FILLTYPE=CHAR,
FILLER=0,FLDALIGN=R; 

AD-FTBL:FORMNO=3,TYPE=B,TBL=FIELD,NOFELD=9,
FLDNAME=CONSEC,FATTR=NONE,DATTR=NONE,FILLTYPE=CHAR,
FILLER=0,FLDALIGN=R; 

AD-FTBL:FORMNO=3,TYPE=B,TBL=FIELD,NOFELD=10,
FLDNAME=ENDMONTH,FATTR=NONE,DATTR=NONE,FILLTYPE=CHAR,
FILLER=0,FLDALIGN=R; 

AD-FTBL:FORMNO=3,TYPE=B,TBL=FIELD,NOFELD=11,
FLDNAME=ENDDAY,FATTR=NONE, DATTR=NONE,FILLTYPE=CHAR,
FILLER=0,FLDALIGN=R; 

AD-FTBL:FORMNO=3,TYPE=B,TBL=FIELD,NOFELD=12,
FLDNAME=ENDHOUR,FATTR=NONE,DATTR=NONE,FILLTYPE=CHAR,
FILLER=0,FLDALIGN=R; 

AD-FTBL:FORMNO=3,TYPE=B,TBL=FIELD,NOFELD=13,
FLDNAME=ENDMINR,FATTR=NONE,DATTR=NONE,FILLTYPE=CHAR,
FILLER=0,FLDALIGN=R; 

AD-FTBL:FORMNO=3,TYPE=B,TBL=FIELD,NOFELD=14,
FLDNAME=ENDSEC,FATTR=NONE,DATTR=NONE,FILLTYPE=CHAR,
FILLER=0,FLDALIGN=R;

Add selection group

AD-SELG:TBL=SELG,SELGNO=4,RESOP=Y,BASDEV=DEV2,
RESDEV=DEV1,BLBAS=1,BLRES=1; 

AD-SELG:TBL=SELT,SELGNO=4,SELTABNO=1,FORMBAS=FORM03,
FORMRES=FORM03,TARIF=NOCALC,DESTCNT=A22,CDRCD=0&&999999,
SERVICE=VOICE,ATNDGR=0&&15,CTYPE=ALL,PAYPARTY=ALL,
CDRC=N,CDRSTA=N,THRGCON=N,NSTAT=N,SECTION=N,CDCHU=N,
CDRAC=N,SFSETUP=N,CDBAD=N,CDRULTE=N,CONNT=N,PCODE=N,
PPCF=N,STATAB1=N,STATAB2=N,DNOTBL1=N,DNOTBL2=N,CDRULT=0,
CONNTL=000000,LEVEL0=0&&999,LEVEL1=0&&254,LEVEL2=0&&30,
TIELINE=N,EXPENS=N,CONNTYP=ALL,COPIN=0&&8,CARRIER=0&&9;

Activate immediate output of call charge data to options
```
AC-SELS:SELGRNO=4; 
```

${DocTitle}, ID: ${DocID}

© 03/2026 Mitel Networks Corporation. All rights reserved. Mitel and the Mitel logo are trademark(s) of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH & Co. KG. All other trademarks herein are the property of their respective owners.