Section 7.5.5. Immediate Output to PT80i (Optional Device)INCDR data output immediate to optional device

7.5.5. Immediate Output to PT80i (Optional Device)

The output format is defined as FORM01 in the GEZAB AMO (Format 1 for output to TTY).

Configure CDR for immediate output to options
```
AD-FEACG:CM=CDRCDUMP;
```

Add device allocation

AD-GEZU:TBL=TTY,NAMEOUT=DEV1,PHDEV=TTY,
DEVCL=TERM1; 

AD-GEZU:TBL=TTY,NAMEOUT=DEV2,PHDEV=TTY,
DEVCL=TERM2;

Assign "Segmentation Tables" (DTAR=standard/daytime rates, NTAR1 cheap/night rate 1, NTAR2 cheap/night rate 2)

AD-TABT:LT=06-00,TARTYPMO=NTAR2,TARTYPTU=NTAR2,
TARTYPWE=NTAR2,TARTYPTH=NTAR2,TARTYPFR=NTAR2,
TARTYPSA=NTAR2,TARTYPSU=NTAR2,TBLNO=1; 

AD-TABT:LT=08-00,TARTYPMO=NTAR1,TARTYPTU=NTAR1,
TARTYPWE=NTAR1, TARTYPTH=NTAR1,TARTYPFR=NTAR1,
TARTYPSA=NTAR1,TARTYPSU=NTAR2; 

AD-TABT:LT=14-00,TARTYPMO=DTAR,TARTYPTU=DTAR,
TARTYPWE=DTAR,TARTYPTH=DTAR,TARTYPFR=DTAR,
TARTYPSA=T,TARTYPSU=NTAR2; 

AD-TABT:LT=18-00,TARTYPMO=DTAR,TARTYPTU=DTAR,
TARTYPWE=DTAR,TARTYPTH=DTAR,TARTYPFR=DTAR,
TARTYPSA=N2,TARTYPSU=NTAR2; 

AD-TABT:LT=22-00,TARTYPMO=NTAR1,TARTYPTU=NTAR1,
TARTYPWE=NTAR1,TARTYPTH=NTAR1,TARTYPFR=NTAR1,
TARTYPSA=NTAR2,TARTYPSU=NTAR2; 

AD-TABT:LT=24-00,TARTYPMO=NTAR2,TARTYPTU=NTAR2,
TARTYPWE=NTAR2,TARTYPTH=NTAR2,TARTYPFR=NTAR2,
TARTYPSA=NTAR2,TARTYPSU=NTAR2;

Assign the tariff and tariff group tables

Assign the tariff table for connections with call charge information
```
AD-TTBL:TBL=WCU,TARTBLNO=1,TARMIN=0,
METHOD=FACTOR,FACTOR=100,LT1=0,TAR1=500;
```

Assign the tariff table for connections without call charge information

AD-TTBL:TBL=WOCU,TARTBLNO=1,ZONE=DIST01,
INTDAY=10,TARDAY=10, INTNT1=10,NTAR1=10,
INTNT2=10,NTAR2=10,INTNT3=10,NTAR3=10,
INTNT4=10,NTAR4=10,TARBAS=100,TARMIN=0,
SEGTBLNO=1,CHPER=Y;

Assign tariff group

ADD-TTBL:TBL=GRP,GRNO=1,CARRIER=0,
SERVICE=VOICE,TARTBLNO=1,CATPTY=NORM;

Add CDR code to route code table
```
AD-RCUT:RTECD=0,CDRCODE=0; 
```

Add selection group for immediate output to options (printer)

AD-SELG:TBL=SELG,SELGNO=1,RESOP=Y,BASDEV=DEV1,
RESDEV=DEV2,BLBAS=1,BLRES=1; 

AD-SELG:TBL=SELT,SELGNO=1,SELTABNO=1,FORMBAS=FORM01,
FORMRES=FORM01,TARIF=TARGR01,DESTCNT=A22,CDRCD=0&&999999,
SERVICE=VOICE&TTC,ATNDGR=0&&15,CTYPE=ALL,PAYPARTY=ALL,
CDRC=N,CDRSTA=N,THRGCON=N,NSTAT=N,SECTION=N,CDCHU=N,
CDRAC=N,SFSETUP=N,CDBAD=N,CDRULTE=N,CONNT=N,PCODE=N,
PPCF=N,STATAB1=N,STATAB2=N,DNOTBL1=N,DNOTBL2=N,CDRULT=0,
CONNTL=000000,LEVEL0=0&&999,LEVEL1=0&&254,LEVEL2=0&&30,
TIELINE=N;

EXPENS=N,CONNTYP=ALL,COPIN=0&&8,CARRIER=0&&9;

Activate CDR with immediate output to options (TTY)
```
AC-SELS:SELGRNO=1; 
```

${DocTitle}, ID: ${DocID}

© 03/2026 Mitel Networks Corporation. All rights reserved. Mitel and the Mitel logo are trademark(s) of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH & Co. KG. All other trademarks herein are the property of their respective owners.