Section 7.6.2. Charge Output at the ATND (CDRATND)

7.6.2. Charge Output at the ATND (CDRATND)

Enable the required CDRATND feature (attendant console)
```
ADD-FEACG:CM=CDRATND;
```
INFO:

If the parameter TARIF=NOCALC was set in the AMO SELG and the parameter TYPE=WITHOUT was set in the AMO GEFE, only the call duration is shown on the attendant console display.

Segmentation table (T=day tariff, N1=night tariff 1, N2=night tariff 2):

ADD-TABT:LT=06-00,TARTYPMO=NTAR2,TARTYPTU=NTAR2,
TARTYPWE=NTAR2,TARTYPTH=NTAR2,TARTYPFR=NTAR2,
TARTYPSA=NTAR2,TARTYPSU=NTAR2, SEGTBLNO=1; 

ADD-TABT:LT=08-00,TARTYPMO=NTAR1,TARTYPTU=NTAR1,
TARTYPWE=NTAR1,TARTYPTH=NTAR1,TARTYPFR=NTAR1,
TARTYPSA=NTAR1,TARTYPSU=NTAR2; 

ADD-TABT:LT=14-00,TARTYPMO=DTAR,TARTYPTU=DTAR,
TARTYPWE=DTAR,TARTYPTH=DTAR,TARTYPFR=DTAR,
TARTYPSA=DTAR,TARTYPSU=NTAR2; 

ADD-TABT:LT=18-00,TARTYPMO=DTAR,TARTYPTU=DTAR,
TARTYPWE=DTAR,TARTYPTH=DTAR,TARTYPFR=DTAR,
TARTYPSA=NTAR2,TARTYPSU=NTAR2; 

ADD-TABT:LT=22-00,TARTYPMO=NTAR1,TARTYPTU=NTAR1,
TARTYPWE=NTAR1,TARTYPTH=NTAR1,TARTYPFR=NTAR1,
TARTYPSA=NTAR2,TARTYPSU=NTAR2; 

ADD-TABT:LT=24-00,TARTYPMO=NTAR2,TARTYPTU=NTAR2,
TARTYPWE=NTAR2,TARTYPTH=NTAR2,TARTYPFR=NTAR2,
TARTYPSA=NTAR2,TARTYPSU=NTAR2;

Add tariff group:

Add the tariff table with call charge information:

ADD-TTBL:TBL=WCU,TARTBLNO=1,TARMIN=0,METHOD=FACTOR,
FACTOR=100,LT1=0,TARIF1=500;

Add the tariff table without call charge information:

ADD-TTBL:TBL=WOCU,TARTBLNO=1,ZONE=DIST01,INTDAY=10,
TARDAY=10 ,INTNT1=10,NTAR1=10,INTNT2=10,NTAR2=10,
INTNT3=10, NTAR3=10 ,INTNT4=10,NTAR4=10,TARBAS=100,
TARMIN=0,SEGTBLNO=1,CHPER=Y;

Add tariff group table 1:

ADD-TTBL:TBL=GRP,GROUPNO=1,CARRIER=0,SERVICE=VOICE,
TARTBLNO=1,METHOD=FACTOR;

Add currency identifier:
```
CHA-DAVF:COMPOS=+2,NAME="EUR"; 
```
Add routing code table (tie trunk connection yes/no):
```
ADD-RCUT:RTECD=0,CDRCODE=0;
```

Selection group for attendant console

Delete selection group 3:
```
DEL-SELG:SELGNO=3;
```

Add selection group 3:

ADD-SELG:TBL=SELG,SELGNO=3,RESOP=N,BASDEV=ATTEND,
RESDEV=NODEV,BLBAS=1,BLRES=0;

Add selection group 3 with selection table 1 (voice connection VOICE):

ADD-SELG:TBL=SELT,SELGNO=3,SELTABNO=1,FORMBAS=ATTEND,
FORMRES=NOFORM,TARIF=TARGR01,DESTCNT=A22,CDRCD=0&&999999,
SERVICE=VOICE,ATNDGR=0&&15,CTYPE=ALL,PAYPARTY=ALL,CDRC=N,
CDRSTA=N,THRGCON=N,NSTAT=N,SECTION=N,CDCHU=N,CDRAC=STN,
SFSETUP=N,CDBAD=N,CDRULTE=N,CONNT=N,PCODE=N,PPCF=N,
STATAB1=N,STATAB2=N,DNOTBL1=N,DNOTBL2=N,CDRULT=0,
CONNTL=000000,LEVEL0=0&&999,LEVEL1=0&&254,LEVEL2=0&&30,
TIELINE=N,EXPENS,CONNTYP=ALL,COPIN=0&&15,CARRIER=0&&9,
RECTYP=ALL;

Add selection group 3 with selection table 2 (communication service FAX):

ADD-SELG:TBL=SELT,SELGNO=3,SELTABNO=2,FORMBAS=ATTEND,
FORMRES=NOFORM,TARIF=TARGR01,DESTCNT=A22,CDRCD=0&&999999
,SERVICE=FAX,ATNDGR=0&&15,CTYPE=ALL,PAYPARTY=ALL,CDRC=N,
CDRSTA=N ,THRGCON=N,NSTAT=N,SECTION=N,CDCHU=N,CDRAC=STN,
SFSETUP=N,CDBAD=N,,CDRULTE=N,CONNT=N,PCODE=N,PPCF=N,
STATAB1=N,STATAB2=N ,DNOTBL1=N,DNOTBL2=N,CDRULT=0,
CONNTL=000000, LEVEL0=0&&999 ,LEVEL1=0&&254,LEVEL2=0&&30,
TIELINE=N,EXPENS=N,CONNTYP=ALL ,COPIN=0&&15,CARRIER=0&&9,
RECTYP=ALL;

Activate selection group 3:
```
ACT-SELS:SELGRNO=3; 
```

Display call charge data at the attendant console

Change the decimal point position or currency unit:
```
CHA-DAVF:COMPOS=<number>,NAME=<string>; 
```
Call up the display (decimal point position and currency unit) on the attendant console:
```
DIS-DAVF; 
```

${DocTitle}, ID: ${DocID}

© 03/2026 Mitel Networks Corporation. All rights reserved. Mitel and the Mitel logo are trademark(s) of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH & Co. KG. All other trademarks herein are the property of their respective owners.

7.6.2. Charge Output at the ATND (CDRATND)

INFO:

Display call charge data at the attendant console