10.39. Number Identification 
Identification (S0/S2 central office)
For manual and automatic identifications
of numbers to CO two COS-parametervalues (only for speech) are used:
- Manual number identification
ADD-COSSU:AVCE=MCIDM;
- Automatic number identification
ADD-COSSU:AVCE=MCIDA;
Identification (MFC-R2)
During identification the number of
partner will be displayed. Since that feature is based on "Identification
CO" the AMO-FEASU is applied.
CHA-FEASU:TYPE=A,CM=TRACCO;
- Class of trunk with identification for calls to the attendant
ADD-COT:COTPAR=ATDI;
- Class of trunk with identification for calls over TIE trunks
ADD-COT:COTPAR=TIEI;
- Class of service with identification for calls to normal subscriber
ADD-COSSU:AVCE=TSUID;