Collapse AllExpand All

7.12. INFO 2000 Outcalls Previous topic Parent topic Child topic Next topic

  • Set central parameters for call data recording 
    AD-FEACG:CM=<param>;
    Possible Values:
    CDRATND
    Charge registration on attendant console
     
    CDRCDUMP
    Central call charge registration immediate
     
    CDRDIS
    Central call charge registration on call-up
     
    CDRSPR
    Station CDR with output on printer
     
    CDRFAST
    Fast CDR output
  • Assign selection groups and tables for output on attendant console 
    AD-
SELG:TBL=SELT,SELGNO=<number>,RESOP=N,BASDEV=ATTEND,RESDEV=NO
DEV,BLBAS=1,BLRES=0; 
 AD-
SELG:TBL=SELT,SELGNO=<number>,SELTABNO=<number>,FORMBAS=ATTEN
D,FORMRES=NOFORM,TARIF=<string>,DESTCNT=<string>,CDRCD=<numbe
r>,

SERVICE=VOICE,ATNDGR=<number>,CTYPE=<string>,PAYPARTY=ALL,CDR
C=N,

CDRSTA=N,CHUAUTH=N,NSTAT=N,ABSCH=N,CDCHU=Y,CDRAC=STN,SFSETUP=
N,CDBAD=N,CDRULTE=N,CONNT=N,PCODE=Y,PPCF=N,TLNTAB=Y,STATAB2=N
,

DNOTBL1=N,DNOTBL2=N,CDRULT=0000,CONNTL=000000,CONNTL=000000,N
NO=0&&999,TIELINE=N;
    The parameter TAR (tariff) defines the call charge unit output; possible values are NOCALC, TARGR00...TARGR05.
  • Assign tariff group 
    AD-TTBL:TBL=GRP,GRNO=<number>,CARRIER=<0-9>,SERVICE=<param>,

TARTBLNO=<1-9>;
  • Assign tariff 
    AD-TTBL:TBL=WCU,TARTBLNO=<1-9>,TARMIN=<number>,METHOD=FACTOR,

FACTOR=100,LT1=0,TAR1=<number>;
    <number> = call charge units in lowest-denomination currency unit
  • Set comma (decimal point) and currency denomination for ATND display 
    CHA-DAVF:COMPOS=<number>,NAME=<number>
  • Assign the route code 
    AD-RCUT:RTECD=<number>,CDRCODE=<number>;
    INFO:
    CDRCD parameter in SELG AMO is CDRCODE parameter in RCUT AMO.
    If the SELG parameters STATAB1, STATAB2, DNOTBL1 and DNOTBL2 are specified with "Y", the STN or destination concerned must be entered in the appropriate table with the SELL AMO (please note that the "station table" acronym in this AMO is "STNTBLx").
  • Make entries in station or destination number lists 
    AD-SELL:TBL=STNTBL1/2,STNO=<number>;
    or 
    AD-SELL:TBL=DNOTBL1/2,STNO=<string>;
${DocTitle}, ID: ${DocID}
© 03/2026 Mitel Networks Corporation. All rights reserved. Mitel and the Mitel logo are trademark(s) of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH & Co. KG. All other trademarks herein are the property of their respective owners.