- Configure executive telephone with add-on device.
- You must keep the COS for parameters FWDFAS and FWDBAS for the RNGXFER
function.
ADD-SBCSU:STNO=7360,OPT=OPTI,CONN=DIR,DVCFIG=OPTIIP,
COS1=13,COS2=13,LCOSV1=5,LCOSV2=1,LCOSD1=5,LCOSD2=1,
DPLN=0,ITR=0,REP=1,STD=4;
- Configure private line for executive with key default for key lines, for example,
25 (optional).
ADD-SBCSU:STNO=7361,OPT=OPTI,CONN=DIR,DVCFIG=OPTIIP,
COS1=13,COS2=13,LCOSV1=5,LCOSV2=1,LCOSD1=5,LCOSD2=1,
DPLN=0,ITR=0,REP=1,STD=25,,INS=SIGNOFF;
- Mark executive 1 with team function.
CHANGE-SDAT:STNO=7360,TYPE=ATTRIBUT,
AATTR=TEAMEXEC&DSSDEST;
- Key assignments for executive 1.
CHANGE-TAPRO:STNO=7360,DIGTYP=OPTIA1,KY01=LINE,
KY02=LINE,KY03=DSS,KY04=RNGXFER,KY05=RNGXFER;
- Define key functions.
- Direct station selection to
secretary.
ADD-ZIELN:STNO=7360,TYPE=DSS,KYNO=22,DESTNOD=7260;
- Configure voice calling to
secretary.
ADD-ZIELN:STNO=7360,TYPE=VC,KYNO=22;
- Configure ring transfer destination to
secretary.
ADD-ZIELN:STNO=7360,TYPE=RNGXFER,KYNO=23,
STNO1=7360,STNO2=7261;
- Configure executive key system with private line.
ADD-KCSU:STNO=7360,TYPE=PRIM,PRIMKEY=20,RIOP=YES,
ORLNPF=PRIME,TMLNPF=RING,SGLBMOD=YES,BUSYRING=NORING,
APRIVAT=NO;
- Configure private line as
key.
ADD-KCSU:STNO=7361,TYPE=PRIM,PRIMKEY=8;
- Private line (assign phantom as
secondary).
ADD-KCSU:STNO=7360,TYPE=SEC,KYNO=21,STNOSEC=7361,
RIOP=YES;
- Configure a new call pickup network-wide for executive 1.
- Call pickup 2 of the partner is in node 200, remote group
2.
ADD-AUN:GRNO=2,STNO=7360,REMAC=808902,REMGRNO=2,
DISTNO=NO,NOTRNG=ON3,PUSECOND=NO,SIGNAL=ALL,TEAMNO=1;
- Save data.
EXEC-UPDAT:BP,ALL;
