14.4.6.3. General administration for E1 CAS (example) 
Set up DIU N2 (as CAS) for MLPP
ADD-BCSU:MTYPE=DIU,LTG=1,LTU=2,SLOT=109, PARTNO="Q2196-X",LWVAR="0",LWPAR1=1,FIDX1=1, LWPAR2=1,FIDX2=1,FCTID=2,HWYBDL=A;
Codes: 546-IWV, 547-MFV, 548-IWV, 549-MFV
ADD-WABE:CD=546&&549,DAR=TIE; ADD-REFTA:TYPE=CIRCUIT,PEN=1-2-109-0,PRI=0;
Dial-Number 546 for TIE (DialPuls-Prot E&M Wink) This part is for EMW protocol with
pulse
dialing trunk group 246
ADD-BUEND:TGRP=246,NAME="E1-EMW-IWV",NO=4; ADD-COP:COPNO=246,PAR=SDL&ANS&SFRM&RLSA& BR64&NAAT&TIM1&IDP1,INFO=E&M-WINK IWV; ADD-COT:COTNO=246,PAR=RCL&ANS&CEBC&MLPR& NTON,INFO=E&M-WINK:IWV; note: COT parameter NAAT must not be configured ADD-TACSU:PEN=1-2-109-1,COTNO=246,COPNO=246, COS=220,LCOSV=1,LCOSD=1,TGRP=246,CCT="E1-IWV", INS=Y,DEVTYPE=TT,DEV=TSEMUSW; ADD-TACSU:PEN=1-2-109-2,COTNO=246,COPNO=246, COS=220,LCOSV=1,LCOSD=1,TGRP=246,CCT="E1-IWV", INS=Y,DEVTYPE=TT,DEV=TSEMUSW; ADD-RICHT:MODE=LRTENEW,LRTE=246,LSVC=VCE, NAME="E1EM IW",TGRP=246,DNNO=1-1-501,ROUTATT=NO, INFO="E1EM-IWV",PDNNO=0; ADD-LDAT:LROUTE=246,LSVC=VCE,LVAL=1,TGRP=246, ODR=2,LAUTH=1; ADD-LDPLN:LDP=546-X,LROUTE=246,LAUTH=1;
Dial-Number 547 for TIE (DTMF-Prot E&M Wink) This part is for EMW protocol with DTMF
dialing trunk group 247
ADD-BUEND:TGRP=247,NAME="E1-EMW-MFV",NO=4; ADD-COP:COPNO=247,PAR=SDL&ANS&SFRM&RLSA&DTMF& DTM1&NAAT,INFO=E&M-WINK MFV; CHANGE-COP:COPNO=247,COPTYPE=COPADD,PAR=PDIG& RDIG&PRMT; ADD-COT:COTNO=247,PAR=RCL&NTON&ANS&CEBC, INFO=E&M-WINK:MFV; note: COT parameter NAAT must not be configured ADD-TACSU:PEN=1-2-109-3,COTNO=247,COPNO=247, COS=220,LCOSV=1,LCOSD=1,TGRP=247,COFIDX=2, CCT="E1-MFV",INS=Y,DEVTYPE=TT,DEV=TSEMUSW; ADD-TACSU:PEN=1-2-109-4,COTNO=247,COPNO=247, COS=220,LCOSV=1,LCOSD=1,TGRP=247,COFIDX=2, CCT="E1-MFV",INS=Y,DEVTYPE=TT,DEV=TSEMUSW; ADD-RICHT:MODE=LRTENEW,LRTE=247,LSVC=VCE, NAME="E1EM MF",TGRP=247,DNNO=1-1-501,ROUTATT=NO, INFO="E1EM-MFV",PDNNO=0; ADD-LDAT:LROUTE=247,LSVC=VCE,LVAL=1,TGRP=247, ODR=2,LAUTH=1; ADD-LDPLN:LCRCONF=LCRPATT,DIPLNUM=0,LDP=547-X, LROUTE=247,LAUTH=1;