14.4.6.9. Signal Information Element 
The following commands must be executed to define the MLPP specific
protocol elements.
/* S2-Trunk NI2 PRI */ CHANGE-PRODE:KIND=PD,PDNAME=PD13,SEC=WELMAND, SETNO=14,B12=08; CHANGE-PRODE:KIND=PD,PDNAME=PD13,SEC=WELMAND, SETNO=31,B12=08; CHANGE-PRODE:KIND=PD,PDNAME=PD13,SEC=WELMAND, SETNO=49,B12=C8; CHANGE-PRODE:KIND=PD,PDNAME=PD13,SEC=RESTP, PDBLK=WELHEX,NO=38,B00=34; CHANGE-PRODE:KIND=PD,PDNAME=PD13,SEC=WELNAME, CS=0,NO=52,B00=13; CHANGE-PRODE:KIND=PD,PDNAME=PD13,SEC=ORG, ACTIVE=Y;