- Add board data (DIUC64):
ADD-BCSU:MTYPE=DIU, LTG=number, LTU=number, SLOT=number,
PARTNO="Q2185-X ";
- Add board data (SIUX):
ADD-BCSU:MTYPE=SIUP, LTG=number, LTU=number, SLOT=number,
PARTNO="Q2233-X ", MFCTYPE=ANIF, LWVAR=0, FCTID=5;
- Add digit analysis result for device type "BWCISL"
ADD-WABE:CD=429, DAR=TIE, CHECK=N;
- Add timers for device type "BWCISL"
COPY-PTIME:INIBLOCK=54, TBLK=3;
CHANGE-PTIME:TYPE=REST, TBLK=3, BTYPE=PARA, P11=1;
- Add classes of service for device type "BWCISL"
ADD-
COSSU:NEWCOS=1, AVCE=TTCR2&TTCR4&CDRATN&CDRC&COSXCD&FWDNWK&MTRACE& ATRACE;
CHANGE-COSSU:TYPE=COS, COS=1, AFAX=TTCR2&FAX&BASIC&INTWOR&OFTFS;
CHANGE-COSSU:TYPE=COS, COS=1, ADTE=TTCR2&BASIC&DSM;
ADD-COSSU:NEWCOS=200, AVCE=TA&TSUID&TNOTCR&CDRC;
ADD-COSSU:NEWCOS=106, AVCE=ANITC;
CHANGE-COSSU:TYPE=COEX, COEX=6, COS=106;
- Add class of parameter for device type "BWCISL"
ADD-COP:COPNO=201,
PAR=SDL&ANS&LSUP&RLSA&BR64&NOAN&TIM1&IDP1&ANIW&TL7& RF0C&AST1;
- Add class of trunk for device type "BWCISL"
ADD-COT:COTNO=201, PAR=RCL&ANS&TRAI&NTON;
- Assign trunk group for device type "BWCISL"
ADD-BUEND:TGRP=129, NAME="ani-cis ', NO=4;
- Edit MFC table:
COPY-MFCTA:MFCVARI=19, MFCVAR=1;
CHANGE-MFCTA:MFCVAR=1, TYPE=TBLB, OPT=FSIG, PHYSIG=15, SIG=EOD;
C
HANGE-MFCTA:MFCVAR=1, TYPE=MFCVAR, OPT=SUPERV, MAXDGTS=8;
- Add analog trunk configuration data:
ADD-TACSU:PEN=GG-UU-BBB-SS, COTNO=201, COPNO=201, COS=200, LCOSV=1,
LCOSD=1, TGRP=129, CCT="ani-cis outg", NNO=9, INS=YES, DEVTYPE=TC,
DEV=BWCISL, MFCVAR=1, DGTCNT=1, CIRCIDX=3, CDRINT=1, DIALTYPE=DIP-DIP,
DIALVAR=0-0;
- Assign outgoing route data
ADD-RICHT:MODE=LRTENEW, LRTE=229, LSVC=ALL, NAME="mfs-cis ",
TGRP=129, DNNO=1;
ADD-LODR:ODR=49, CMD=OUTCOEX, COEX=6;
ADD-LODR:ODR=49, CMD=ECHO, FIELD=2;
ADD-LODR:ODR=49, CMD=END;
ADD-LDAT:LROUTE=229, LSVC=ALL, TGRP=129, ODR=49, LAUTH=1, LATTR=WCHREG;
ADD-LDPLN:LDP=429-z, LROUTE=229, LAUTH=1;
