5.6.8. AMO Information 
AMO LWPAR
A branch of AMO LWPAR is available to deal with the full integration
configuration of PBXXX, PBXXX.(The partial integration configurations
still use the existing DIUS2 branch of the AMO) On initialistaion of
the database data blocks are created with default values and therefore
there is no ADD function for the amo.To reset a LWPAR block to default
a DEL function exists.When changing parameters two sub branches of the
AMO exist under the parameter CDGTYPE, these are CONF and TIMER.
these are displayed together in the display branch of the AMO as below.
+---------------------------------------------------------------------+
| LOADWARE PARAMETERS CIRCUIT TYPE: CDG SOURCE:DB BLOCK: 0 |
+---------------------------------------------------------------------+
| [R]UNWD = DPACN [R]PATTERN = 213 |
| [C]BCHNEG = Y [C]CRC4C = N [C]CRC4REP = N |
| [C]TEMPSIG= Y [C]NSITR = Y [C]NSIOUT = Y |
| [C]CDGCF = Y [C]CONVBN = N [C]TIDOP = Y |
| [C]C3CONF = Y [C]CONACK = Y [B]LSCF = N |
| [C]NSIMSGS= 150 [C]SADRTM = NSAP [C]MAXTMS = 500 |
| [C]RESTLNK= Y [C]RESTALL = Y |
| [C]AROB = N [C]SCCONF = N [C]ATCPN = 11 |
| [C]ICPN = 12 [C]APCPN = 13 [C]DASSCPN = 14 |
| [C]T301 = 180 SEC [C]T302 = 10 SEC [C]T303 = 4 SEC |
| [C]T304 = 15 SEC [C]T305 = 30 SEC [C]T308 = 4 SEC |
| [C]T309 = 90 SEC [C]T310 = 10 SEC [C]T313 = 4 SEC |
| [C]T314 = 4 SEC [C]T316 = 120 SEC [C]T322 = 4 SEC |
| [C]TBID = 5 SEC [C]TDPNSSC = 500 MSEC [C]TROPTBR = 10 SEC |
| [C]TWEOS = 60 SEC [C]TAMOST = 60 [C]TROPTNR = 30 SEC |
| [C]DEFID = B010 [C]TSABMR = 200 MSEC [C]TAROB = 10 SEC |
| [R]PROT = DPNSS [C]VMSYSTAD = 0 |
| [R]BCHKONF = 16&&30 |
| [R]EQVIRC = 1&&30 |
| [R]VCHCONF = 16&&30 |
| RES3 = 0 RES4 = 0 RES5 = 0 |
| DEV = INDEP TIPL = 10 IPLDS = A |
| LCOSMAP(Y=ENABLED,N=DISABLED) = N DEFPASSW = 9999 |
| INFO = |
+---------------------------------------------------------------------+
| DEFC: CIRCUIT SPECIFIC DATA WITHOUT BOARD LEVEL SWITCHING |
| (CIRCUIT LEVEL SWITCHING BY AMO-DSSU NEVERTHELESS REQUIRED) |
| DEFR: CIRCUIT SPECIFIC DATA WITH BOARD LEVEL SWITCHING |
| (PLUS CIRCUIT LEVEL SWITCHING BY AMO-DSSU REQUIRED) |
| DEFB: BOARD SPECIFIC DATA |
| (BOARD LEVEL SWITCHING REQUIRED) |
+---------------------------------------------------------------------+
AMO-LWPAR-218 LOADWARE PARAMETERS FOR NETWORKING MODULES
DISPLAY COMPLETED;
<
The explanations of DEFC DEFR and DEFB refer to the functions
which must be restarted following a change of the parameter.This is indicated
by the letter in parenthisis adjacent to the parameter
The parameters in the block are defined as follows: TYPE=CDG
Table 3. LWPAR block initialization values
|
Parameter
|
Initialization/default
|
Definition/Options
|
|
|
The following are in the branch
CDGTYPE = CONF
|
|||
|
Idle code (PATTERN)
|
213 (D5H)
|
BYTE in decimal
|
|
|
User Network Definition (UNWD) DPACN
DPNSS A Cornet Network DPACU DPNSS A Cornet User DPBCN DPNSS B Cornet
Network DPBCU DPNSS B Cornet User
|
DPACN
|
DPACN DPACU DPBCN DPBCU
|
|
|
Protocol (PROT)
|
DPNSS
|
DPNSS
DASS
|
|
|
Equipped B channels - BitMap
|
All equiped
|
Bitmap, 1 = equiped.
|
|
|
DPNSS X/Y B-Channels (BCHCONF)
|
16-30
|
Channels configured here are those channels
that are required to be set as Y, those not entered are automatically
configured as X
ie 1-15 X, 16-30 Y
|
|
|
DPNSS virtual channels (EQVIRC)
|
30
|
can sub equip
|
|
|
DPNSS X/Y virtual channels (VCHCONF)
|
16-30
|
Channels configured here are those channels
that are required to be set as Y, those not entered are automatically
configured as X
ie 1-15 X, 16-30 Y
|
|
|
Msg size NSI to non NSI (NSIMSGS)
|
300
|
RANGE (100:2048)
|
|
|
DASS-CORNET subaddress NPI (SADRTM)
|
NSAP (=0)
|
can have user specified
|
|
|
DPNSS transit msg size max (MAXTMS)
|
500
|
RANGE (0-2048)
|
|
|
CORNET: Restart link at startup
(RESTLNK)
|
YES
|
YES/NO
|
|
|
DPNSS/DASS:Restart LAPs at startup
(RESTALL)
|
YES
|
YES/NO
|
|
|
CORNET-N(Q): B-Channel negotiation
(BCHNEG)
|
YES
|
YES/NO
|
|
|
CORNET-N(Q): CRC4 (CRC4C)
|
NO
|
YES/NO
|
|
|
DPNSS/DASS: CRC4 (CRC4REP)
|
NO
|
YES/NO
|
|
|
Temporary signaling connection
(TEMPSIG)
|
YES
|
YES/NO
|
|
|
NSI CORNET-NQ transit (NSITR)
|
YES
|
YES/NO
|
|
|
Insert NSI DPNSS outgoing (NSIOUT)
|
YES
|
YES/NO
|
|
|
PBXXX transit working on Call
Forward (CDGCF)
|
YES
|
YES/NO
|
|
|
Conversion back Notify from CORNET-N
(CONVBN)
|
NO
|
This should be yes when connected to Realitis/DX
|
|
|
DPNSS trunk identity option (TIDOP)
|
NO
|
YES/NO
|
|
|
3-party conference (C3CONF)
|
YES
|
YES/NO
|
|
|
Connect Ack sent by Protocol Han dler
(CONACK)
|
YES
|
YES/NO
|
|
|
Loadware saved compressed in Flash
(LSCF)
|
NO
|
YES/NO
|
|
|
ROP,Default call id length when
used with Cornet NQ (DEFID)
|
B001
|
B001=1 digit, B010=2 digits, B011= 3digits and
B100= 4 digits
|
|
|
Dass operator number (DASSOPN)
|
0
|
digit string
|
|
|
Kind of device on trunk (DEV)
|
CDGCOD
CDGCONN
|
||
|
Service information (INFO)
|
Max. of 50 positions
|
||
|
COS mapping. (LCOSMAP)
|
NO
|
YES(enabled)/NO(disabled)
|
|
|
Diversion Activation/Deactivation
default password (DEFPASSW)
|
9999
|
0 to 6 digits.
'Digit values 0 to
9
|
|
|
The following are in the branch
CDGTYPE = CONF2
|
|||
|
Analogue trunk call priority(ATPCN)
|
12
|
1 - 16
|
|
|
Internal call priority (ICPN)
|
11
|
1 - 16
|
|
|
Analogue PSTN (APCPN)
|
14
|
1 - 16
|
|
|
DASS call priority (DASSCPN)
|
13
|
1 - 16
|
|
|
AROB mapping enabled(AROB)
|
NO
|
YES/NO
|
|
|
Station controlled conference
enabled (SCCONF)
|
NO
|
YES/NO
|
|
|
Voicemail system address (VMSYSTAD)
|
Empty - digit length = 0
|
digit string
|
|
|
The following are in the branch
CDGTYPE = TIMER
|
|||
|
Callback interdigit timer (TBID)
|
5 seconds (= 0x4005)
|
WORD
|
|
|
ROPT release timer both end(TROPTBR)
|
10 seconds (= 0x400A)
|
WORD
|
|
|
ROPT release timer neither end
release (TROPTNR)
|
30 seconds (= 0x401E)
|
WORD
|
|
|
DPNSS collision timer (TDPNSSC)
|
500 msec (= 0x0005)
|
WORD
|
|
|
Timer wait for EOS from CORNET
(TWEOS)
|
60 seconds (= 0x403C)
|
WORD
|
|
|
DPNSS SABMR retransmission timer
(TSABMR)
|
0 seconds (=0x4000)
|
WORD
|
|
|
T301 timer
|
180 seconds (=0x40B4)
|
WORD
|
|
|
T302 timer
|
10 seconds (=0x400A)
|
WORD
|
|
|
T303 timer
|
4 seconds (=0x4004)
|
WORD
|
|
|
T304 timer
|
15 seconds (=0x400F)
|
WORD
|
|
|
T305 timer
|
30 seconds (=0x401E)
|
WORD
|
|
|
T308 timer
|
4 seconds (=0x4004)
|
WORD
|
|
|
T309 timer
|
90 seconds (=0x405A)
|
WORD
|
|
|
T310 timer
|
10 seconds (=0x400A)
|
WORD
|
|
|
T313 timer
|
4 seconds (=0x4004)
|
WORD
|
|
|
T314 timer
|
4 seconds (=0x4004)
|
WORD
|
|
|
T316 timer
|
120 seconds (=0x4078)
|
WORD
|
|
|
T322 timer
|
4 seconds (=0x4004)
|
WORD
|
|
|
AMO supervise timer (TAMOST)
|
60 seconds (= 0x403C)
|
WORD
|
|
|
IPL timer (TIPL)
|
10 seconds
|
WORD
|
|
|
Intrusion level (IPLDS)
|
A
|
A = Allowed NA = Not-allowed
|
|
|
AROB timer (TAROB)
|
10 seconds
|
WORD
|
|
|
Reserved 3
|
0
|
WORD
|
|
|
Reserved 4
|
0
|
WORD
|
|
|
Reserved 5
|
0
|
WORD
|
|
|
The following are in the branch
CDGTYPE = MAPPING
|
|||
|
Conversion between OpenScape 4000
ITR and Realitis trunk group number (TBL = DXTGITR)
|
DXTGPOS (0 - 31)
|
||
|
Conversion between OpenScape 4000
ITR and Realitis call barring group (TBL = TRGCBG)
|
TRG (0 - 15) CBG (0 - 127)
|
||
|
Conversion between OpenScape 4000
LCOSD and TAC value in DPNSS1 (TBL = LCOSDRRG)
|
LCOS (1 - 32) RRG (0 - 127)
|
||
|
Conversion between OpenScape 4000
LCOSV and TAC value in DPNSS1 (TBL = LCOSVRRG)
|
LCOS (1 - 32) RRG (0 - 127)
|
||