Collapse AllExpand All

5.7.4. Generation (Example) Previous topic Parent topic Child topic Next topic

CorNet-VN will run on the TMDNH (Q2192-X, Function ID 3) card or on its replacement DIUN2U (Q2216-X, Function ID 6).
  • How to configures the TMDNH / DIU2U board
    configures the TMDNH board:
    ADD-BCSU: MTYPE=TMD, LTG=x, LTU=y, SLOT=z, PARTNO="Q2192-X", 
    FCTID=3, LWVAR="K", HWYBDL=A; 
    
    configures the DIU2U board:
    ADD-BCSU: MTYPE=TMD, LTG=x, LTU=y, SLOT=z, PARTNO="Q2216-X", 
    FCTID=6, LWVAR="K", HWYBDL=A;
    
  • How to configures the CorNet-VN AT&T
    The following commands are based on COPY-PRODE: TYPE=PVCD, PVCDNO=16 to load the US protocols into memory (default PVCDNO = 16). Then the associated PRODE tables for CVN1 and CVN2 are available.
    configures the AT&T trunk:
    CHANGE-LWPAR: TYPE=TMD, TMDTYPE=TMDMOS, BLNO=3, 
    OPMODE=FRAMEESF&BISUB8ON&BDETON, CABLETYP=1, OESDISTH=30, 
    OESREQTH=4, SESDISTH=10, SESREQTH=10, ACKTIM=10, DLVTIM=300, 
    OCTMAX=260, RETMAX=3, WINDOW=7, CRIDC=0288, NSFIV=1, 
    NSFTSC=9, TTSC=4;
    
    configures new device S1CVN with AT&T protocol:
    ADD-TDCSU: OPT=NEW, PEN=x-y-z-1, COTNO=99, COPNO=95, DPLN=1, 
    ITR=0, LCOSV=1, LCOSD=1, CCT=" ", DESTNO=5, PROTVAR="CVN1", 
    SEGMENT=1, DEDSVC=NONE ,TRTBL=GDTR, SIDANI=N, ATNTYP=TIE, 
    CBMATTR=NONE, TCHARG=N, SUPPRESS=0, TRACOUNT=31, 
    SATCOUNT=MANY, NNO=1-1-501, ALARMNO=2, FIDX=1, CARRIER=1, 
    ZONE=EMPTY, COTX=99, FWDX=1, CHIMAP=N, UUSCCX=16, UUSCCY=8, 
    FNIDX=1, NWMUXTIM=10, CLASSMRK=EC&G711&G729OPT, TGRP=98, 
    SRCHMODE=DSC, INS=Y, DEV=S1CVN, BCHAN=1&&23, BCNEG=N, BCGR=1, 
    LWPAR=3;
    
  • How to configures the CorNet-VN MCI trunk
    The following commands are based on COPY-PRODE: TYPE=PVCD, PVCDNO=16 to load the US protocols into memory (default PVCDNO = 16). Then the associated PRODE tables for CVN1 and CVN2 are available.
    configures the MCI trunk:
    CHANGE-LWPAR: TYP=TMD, TMDTYP=TMDMOS, BLNO=4, 
    OPMODE=FRAMEESF&BISUB8ON&BDETON, CABLETYP=1, OESDISTH=30, 
    OESREQTH=4, SESDISTH=10, SESREQTH=10, ACKTIM=10, DLVTIM=300, 
    OCTMAX=260, RETMAX=3, WINDOW=7, CRIDC=0222, NSFIV=1, 
    NSFTSC=9, TTSC=4
    
    configures new device S1CVN with MCI protocol:
    ADD-TDCSU: OPT=NEW, PEN=x-y-z-1, COTNO=99, COPNO=95, DPLN=1, 
    ITR=0, LCOSV=1, LCOSD=1, CCT=" ", DESTNO=5, PROTVAR="CVN2", 
    SEGMENT=1, DEDSVC=NONE ,TRTBL=GDTR, SIDANI=N, ATNTYP=TIE, 
    CBMATTR=NONE, TCHARG=N, SUPPRESS=0, TRACOUNT=31, 
    SATCOUNT=MANY, NNO=1-1-501, ALARMNO=2, FIDX=1, CARRIER=1, 
    ZONE=EMPTY, COTX=99, FWDX=1, CHIMAP=N, UUSCCX=16, UUSCCY=8, 
    FNIDX=1, NWMUXTIM=10, CLASSMRK=EC&G711&G729OPT, TGRP=98, 
    SRCHMODE=DSC, INS=Y, DEV=S1CVN, BCHAN=1&&23, BCNEG=N, BCGR=1, 
    LWPAR=4;
    
  • Activation / Deactivation of CorNet-VN
    displays the number of contracted, assigned and free CVN trunks:
    DISP-CODEW;