- DigiTe:
Initiate a consultation hold from the talking state (in the OpenScape
4000) and dial the OPROVR code: -> ground pulse/flash to trunk.
You can simplify the procedure by programming the 'OPROVR'
code on a name/destination key. Then you do not have to initiate the
consultation hold.
Send the (suffix) dialing to the remote exchange with the signaling
method (-outgoing: DIP or DTMF) that is assigned to the line.
- AnaTe:
Initiate the consultation hold from the call and dial the OPROVR code:
-> ground pulse/flash to trunk.
Send the (suffix) dialing from a COMTEL 3 (DIP-AnaTe) to the remote
exchange with the signaling method (-outgoing: DIP or DTMF) that is assigned
to the line.
- AC:
Push the aggregate key during the call -> ground pulse / trunk flash;
(WABE: OPROVR for AC is not necessary). Then it is not possible to dial
on the line.
