5.37.4. Error Messages 
The feature Voice Compression has requested 3 new error messages.
- F5993 CIRCIUT L2 ERROR VC D-channel of Voice Compression not active. (Level-2-error)
- F5994 CIRCUIT B CHANNEL VC DEF B-channel of Voice Compression not active.
- F5995 CIRCUIT B CHANNEL VC OK B-channel of Voice Compression active again.
How to interpret the auxiliary data:
|
Byte 0 =
|
10
|
Error type (DB_M_QF_CIR_L2_ERR_SET)
|
|
D-channel error or B-channel changes
|
||
|
Byte 1, 2 =
|
0001
|
Number of reported errors = 01
|
|
Byte 3 =
|
02
|
Length of following data: 2 Bytes
|
|
Byte 4 =
|
1. Status byte:
|
Bit 0 = D-channel
|
|
Bit 1-7 = B-channel 1-7
|
||
|
Byte 5 =
|
2. Status byte:
|
Bit 8-15 = B-channel 8-15
|
If the channel is active the corresponding bit is set to 1. If the
channel is defect or not configured the corresponding bit is set to 0.
In case of the VCM-B7 (without B-channel 8-15) the second status byte
is set always to 00.
All error messages are described in the documentation OpenScape
4000/HiPath 4000, Troubleshooting (AlFe).
Examples of error messages:
The error messages are based on following configuration:
Both switches are connected with 2 S0 trunks which are linked to one
VCM-B15. The VCM D-channel and the VCM B-channels 1-7 (VCSU 1 + 2) occupies
the STMD trunk 0 and the VCM B-channels 8-15 (VCSU 3 + 4) occupies the
STMD trunk 1.
- At the remote system the STMD trunk 0 has been switched off. (VCM D-channel and B-channels
1-7
are
affected)
F5414 M4 N5381 OUT SERV BPA CIRCUIT L2 ERROR 97-02-10 07:33:36 ALARM CLASS:SWU-PER:001 ** :LTG1 :LTU2 :115: 0 : 0 Q2174-X STMD BST:01 FW: C360-L REASON:01H DEACTIVATED BY PEER FORMAT:36 F5414 M4 N5382 OUT SERV BPA CIRCUIT L2 ERROR 97-02-10 07:33:36 ALARM CLASS:SWU-PER:001 ** :LTG1 :LTU2 :115: 0 : 0 Q2174-X STMD BST:01 FW: C360-L REASON:0BH TEI REMOVED FORMAT:36 F5994 M4 N5383 OUT SERV BPA CIRCUIT B CHANNEL VC DEF 97-02-10 07:33:38 ALARM CLASS:SWU-PER:001 ** :LTG1 :LTU1 :055: 0 : 0 Q2235-X VCM-B15 BST:01 PLS:-B3 FORMAT:22 1000010201FFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFF F5414 M4 N5384 OUT SERV BPA CIRCUIT L2 ERROR 97-02-10 07:33:49 ALARM CLASS:SWU-PER:001 ** :LTG1 :LTU1 :055: 0 : 0 Q2235-X VCM-B15 BST:01 PLS:-B3 REASON:05H PEER OUT OF ORDER FORMAT:36 F5993 M4 N5385 OUT SERV BPA CIRCUIT L2 ERROR VC 97-02-10 07:33:49 ALARM CLASS:SWU-PER:001 ** :LTG1 :LTU1 :055: 0 : 0 Q2235-X VCM-B15 BST:01 PLS:-B3 FORMAT:22 1000010200FFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFF - At the remote system the STMD trunk 0 has been activated
again.
F5418 M4 N5389 IN SERV BPA CIRCUIT LX ACTIVE 97-02-10 07:35:16 ALARM CLASS:SWU-PER:001 ** :LTG1 :LTU2 :115: 0 : 2 Q2174-X STMD BST:01 FW: C360-L REASON:09H LAYER 3 ACTIVE FORMAT:36 F5418 M4 N5390 IN SERV BPA CIRCUIT LX ACTIVE 97-02-10 07:35:16 ALARM CLASS:SWU-PER:001 ** :LTG1 :LTU1 :055: 0 :15 Q2235-X VCM-B15 BST:01 PLS:-B3 REASON:09H LAYER 3 ACTIVE FORMAT:36 - At the remote system the STMD trunk 1 has been deactivated. (VCM B-channels 8-15 are
affected)
F5414 M4 N5391 OUT SERV BPA CIRCUIT L2 ERROR 97-02-10 07:38:31 ALARM CLASS:SWU-PER:001 ** :LTG1 :LTU2 :115: 1 : 0 Q2174-X STMD BST:01 FW: C360-L REASON:01H DEACTIVATED BY PEER FORMAT:36 F5414 M4 N5392 OUT SERV BPA CIRCUIT L2 ERROR 97-02-10 07:38:31 ALARM CLASS:SWU-PER:001 ** :LTG1 :LTU2 :115: 1 : 0 Q2174-X STMD BST:01 FW: C360-L REASON:0BH TEI REMOVED FORMAT:36 F5414 M4 N5393 OUT SERV BPA CIRCUIT L2 ERROR 97-02-10 07:38:31 ALARM CLASS:SWU-PER:001 ** :LTG1 :LTU2 :115: 1 : 0 Q2174-X STMD BST:01 FW: C360-L REASON:0BH TEI REMOVED FORMAT:36 F5412 M4 N5394 OUT SERV BPA CIRCUIT L1 ERROR 97-02-10 07:38:33 ALARM CLASS:SWU-PER:001 ** :LTG1 :LTU2 :115: 1 : 0 Q2174-X STMD BST:01 FW: C360-L REASON:04H NO SIGNAL (LOCAL ALARM) FORMAT:36 F5994 M4 N5395 OUT SERV BPA CIRCUIT B CHANNEL VC DEF 97-02-10 07:38:33 ALARM CLASS:SWU-PER:001 ** :LTG1 :LTU1 :055: 0 : 0 Q2235-X VCM-B15 BST:01 PLS:-B3 FORMAT:22 10000102FF00FFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFF - At the remote system the STMD trunk 1 has been switched on
again.
F5418 M4 N5399 IN SERV BPA CIRCUIT LX ACTIVE 97-02-10 07:40:13 ALARM CLASS:SWU-PER:001 ** :LTG1 :LTU2 :115: 1 : 2 Q2174-X STMD BST:01 FW: C360-L REASON:09H LAYER 3 ACTIVE FORMAT:36 F5995 M4 N5400 IN SERV BPA CIRCUIT B CHANNEL VC OK 97-02-10 07:40:13 ALARM CLASS:SWU-PER:001 ** :LTG1 :LTU1 :055: 0 : 0 Q2235-X VCM-B15 BST:01 PLS:-B3 FORMAT:22 10000102FFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFF - The VCM board at the remote system has been activated, but STMD trunk 1 (VCM
B-channels 8-15) is out of
service.
F5418 M4 N5412 IN SERV BPA CIRCUIT LX ACTIVE 97-02-10 07:46:19 ALARM CLASS:SWU-PER:001 ** :LTG1 :LTU1 :055: 0 :15 Q2235-X VCM-B15 BST:01 PLS:-B3 REASON:09H LAYER 3 ACTIVE FORMAT:36 F5994 M4 N5413 OUT SERV BPA CIRCUIT B CHANNEL VC DEF 97-02-10 07:46:19 ALARM CLASS:SWU-PER:001 ** :LTG1 :LTU1 :055: 0 : 0 Q2235-X VCM-B15 BST:01 PLS:-B3 FORMAT:22 10000102FF00FFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFF