10.6.2.2. Fixed Call Forwarding 
You can enter, activate, deactivate, or delete one fixed forwarding destination from
the
station device. When you enter and save the destination from the station device, the
forwarding is activated. When you enter the destination with the AMO ZIEL, it is not
automatically activated. Disabling a destination does not automatically delete the
destination
entry. Activate it separately.
Program and delete fixed call forwarding
- from the station device
or
- with AMO ZIEL or Configuration Management
Activate or deactivate fixed call forwarding
- from the station device
or
- with AMO ACTDA or Configuration Management
You can configure fixed call forwarding for optiPoint via the service menu or with
codes; you
must use codes for Anate and functional terminals. Configure the digit analysis results
with
the AMO WABE or Configuration Management.