10.6.3.5. AMO TDCSU 
Parameter FWDX Maximum number of call forwarding entries (FWDMAX)
in the partner system.
You only need this parameter for ECMA-QSIG or EURO-ISDN protocol (see
PROTVAR parameter). For ECMA-QSIG protocol, you should not set this value
to more than 5.
 |
Configuration Management --> System Data
--> Trunk --> Trunk, click Search and select the circuit. In the
Digital Extensions tab, change and save the value for the call forwarding
entries.
|
 |
To change the call forwarding entries using
the AMO TDCSU:
CHANGE-TDCSU:PEN=<LTG-LTU-SLOT-PORT>,FWDX=<number>,DEV=<device>,BCGR=<B
channel group number>; |