Collapse AllExpand All

10.6.3.7. AMO ZAND Previous topic Parent topic Child topic Next topic

  • Fixed forwarding destination is CFNR destination
    assistant.gif
    You can only configure the identifier "Fixed forwarding destination is CFNR destination" in expert mode. Expert mode --> ComWin --> Open ...< IP> using AMO (see AMO command).
    comwin.gif
    Using the AMO ZAND, configure the identifier "Fixed forwarding destination is CFNR destination": CHANGE-ZANDE:TYPE=ALLDATA2,CFABLOOP=YES;
  • Set number of chained call forwarding instructions to a maximum of 10
    assistant.gif
    You can only configure the number of chained call forwarding instructions in expert mode. Expert mode --> ComWin --> Open ...< IP> using AMO (see AMO command).
    comwin.gif
    Use the AMO ZAND to configure the number of chained call forwarding instructions: CHANGE-ZAND:TYPE=ALLDATA2,FWDMAX=10;
  • Set up user interface without fixed forwarding for USA
    assistant.gif
    You can only administer setting the menus for call forwarding in expert mode. Expert mode --> ComWin --> Open ...< IP> using AMO (see AMO command).
    comwin.gif
    Using the AMO ZAND, set the menus for call forwarding: CHANGE-ZAND:TYPE=ALLDATA3,CFUI=NO;
  • A maximum of 5 CFU call forwarding instructions should be possible for optiPoint after no answer:
    assistant.gif
    You can only configure the number of maximum call forwarding instructions in expert mode. Expert mode --> ComWin --> Open ...< IP> using AMO (see AMO command).
    comwin.gif
    Use the AMO ZAND to configure the number of call forwarding instructions: CHANGE-ZAND:TYPE=DIST,DIVSQIDX=3,DIVTYPE=CFU,MAXDIVNO=5,ALLDIVTY=CFNR;

    Table 58. Result of the Entry in the DIST Table

       
    CFU
    CFB
    CFNR
    CD
    5
    CFNR
    X
    		      
    DIVSQIDX=3 is intended for the optiPoint devices.
${DocTitle}, ID: ${DocID}
© 03/2026 Mitel Networks Corporation. All rights reserved. Mitel and the Mitel logo are trademark(s) of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH & Co. KG. All other trademarks herein are the property of their respective owners.